Assessments - 4, GPA: 4
(
)
)
|
Facilidade de uso
5.3 HOW TO ADJUST AND TENSION THE STRIDING BELT ON THE LIFE FITNESS TREADMILL Do not move treadmill or place hands under treadmill while it is plugged into an electrical outlet! Tool required: 6mm hex key wrench THE BELT TENSIONING BOLTS The Life Fitness treadmill has access holes in the rear roller guards, which allow access to the tensioning bolts. These tensioning bolts make it possible to adjust tracking and centering of the striding belt (A) without removing the guards. NOTE: It is extremely important that the treadmill be correctly leveled prior to any tracking adjustments. An unstable unit may cause striding belt misalignment. See "How To Stabilize the Life Fitness Treadmill" in the "Set Up" section prior to attempting any rear roller adjustments. Before proceeding, it is helpful to visualize the REAR ROLLER (B) pivot point (C). Each adjustment made to one side of the ROLLER must be met with an equal and opposite adjustment (D) to the other side of the ROLLER to maintain an ideal belt tension at the pivot point. TRACKING (CENTERING) AN EXISTING OR NEW STRIDING BELT 1 Locate the two access holes to the belt tensioning bolts on each of the rear roller guards. 2 Stand on the sides of the treadmill and straddle the belt, not standing on it. Enter the MANUAL Workout and set the belt speed to run at 4.0 mph (6,4 kph). 3 If the striding belt has moved to the right, turn the right tension bolt 1/4 turn clockwise with provided 6mm hex key wrench, and then turn the left tension bolt 1/4 turn counter-clockwise to start striding belt tracking back to center of roller. 4 If the striding belt has moved to the left, turn the left tension bolt 1/4 turn clockwise and then turn the right tension bolt 1/4 turn counter-clockwise to start striding belt tracking back to center of roller. Repeat adjustments until striding belt appears centered. Allow machine to continue running for several minutes to observe if tracking remains stabilized. NOTE: Do not exceed one full turn of the adjusting screws in either direction. If after one full turn the belt does not track properly, contact Customer Support Services. The phone numbers are listed in "How to Obtain Product Service." TENSIONING AN EXISTING STRIDING BELT Under normal usage, the treadmill striding belt may stretch slightly. If the belt starts to slip during use, take the steps listed below to correct the tension. 1 Using the STOP key, stop the treadmill. 2 Turn the belt tensioning bolts clockwise a quarter-turn per side to tension the belt. Do not exceed one full turn (four quarter-turns per side). 3 Set the treadmill at 2.0-mph (3,2 kph) and get on to make sure the belt no longer slips. Also, check the striding belt’s tracking. If the striding belt drifts to the left or right see Tracking (Centering) an Existing or New Striding Belt. NOTE: Do not over-tighten the tensioning bolts while making belt adjustments. Over-tightening of bolts may over stretch and damage the striding belt or roller bearings. Do not exceed one full turn of either bolt in either direction. 5.4 HOW TO OBTAIN PRODUCT SERVICE 1. Verify the symptom and review the operating instructions. 2. Locate and document the serial numbers of the base and the console. The base’s serial number is located on front of the treadmill near the power switch and the console serial number is located on the back surface of the console. 3. Contact the nearest Life Fitness Customer Support Services Group: For Product Service within the United States and Canada: Telephone: (+1) 847.451.0036 FAX: (+1) 847.288.3702 Toll-free telephone: 800.351.3737 For Product Service Internationally: Life Fitness Europe GmbH Life Fitness Italia S.R.L. Life Fitness Latin America Life Fitness Iberia Telephone: (+49) 089.317.751.66 Telephone: (+39) 0472.835.470 and Caribbean Telephone : (+34) 93 672 4660 FAX: (+49) 089.317.751.38 FAX: (+39) 0472.833.150 Telephone: (+1) 847.288.3964 FAX : (+34) 93 672 4670 Toll-free telephone: 800.438836 FAX: (+1) 847 288.3886 Life Fitness (UK) LTD Telephone: (+44) 1353.665507 Life Fitness Vertriebs GmbH Life Fitness Brazil FAX: (+44) 1353.666018 Telephone: (+43) 1615.7198 Telephone: (+55) 11.7295.2217 FAX: (+43) 1615.7198.20 FAX: (+55) 11.7295.2218 Life Fitness Atlantic BV Life Fitness Benelux Life Fitness Asia Pacific Ltd Life Fitness Japan Telephone: +31 (0) 180 64 66 66 Telephone: (+852) 2891.6677 Telephone: (+81) 3.3359.4306 FAX: +31 (0) 180 64 66 99 FAX: (+852) 2575.6001 FAX: (+81) 3.3359.4307 6 SPECIFICATIONS LIFE FITNESS F3 TREADMILL SPECIFICATIONS Designed use: Home Maximum user weight: 350 pounds / 159 kilograms Speed range: 0.5 - 10.0 mph in 0.1 increments Elevation range: 0%-12% (in 0.5% increments) Motor: 3 HP continuous duty DC Rollers: Front: 2.6" (67mm) precision crowned Back: 2.0" (50mm) precision crowned Belt: 55" Length x 20" Width (147cm Length x 50cm Width), multi-ply Deck: Flex Deck cushioning, not reversible Handrails: Ergo Crossbar with side handrails. Accessory tray: Standard, designed int...