Assessments - , GPA: ( )

Instruções de Operação Life Fitness, Modelo 95TI

Fabricante : Life Fitness
Arquivo Tamanho: 1.36 mb
Arquivo Nome : 3cc17066-a5c3-410c-a3a1-51cb8ca74d69.pdf

Língua de Ensino:

O documento está colocado, por favor, espere

Baixe o seu Fechar

O documento está colocado, por favor, espere

Baixe o seu Fechar

For either configuration, remove the ROLLER GUARDS by unscrewing the MOUNTING SCREWS as shown. Configuration 1 Life Fitness Model 97Ti, 95Ti, 93T Treadmills How To...Replace or Install Rear Roller Guards Tools Required: Philips Screwdriver, Flat Blade Screwdriver 5. Carefully remove the LOW PROFILE SQUARE GROMMET from the bottom of the BASE FRAME. (Configuration 1 Only) CAUTION: Be careful not damage the LOW PROFILE SQUARE GROMMET when removing it from the BASE FRAME. 6. Reinstall the LOW PROFILE SQUARE GROMMET back in the upper hole in the BASE FRAME. (Configuration 1 Only) 7. Position the new ROLLER GUARD, which has a larger, wider surface, under the STRIDING BELT. Align the mounting holes and install the ROLLER GUARD MOUNTING SCREWS. 8. Repeat STEPS 2 through 7 for the remaining ROLLER GUARD. Upon completion, run the treadmill and check for interference or binding. If necessary realign the ROLLER GUARDS. Tighten the MOUNTING SCREWS to 22-37 in lbs. M051-00K58-B128...