Assessments - 3, GPA: 3.3 ( )

Fabricante : Precor Arquivo Tamanho: 3.68 mb Arquivo Nome : Língua de Ensino:

This limits how fast the running belt moves and, consequently, the number of speed settings that are available to the user. The speed is displayed in miles per hour (mph) or kilometers per hour (kph) depending upon the units of measure (U.S. standard or Metric) selected earlier. The speed ranges from 0.5 to 16 mph (0.8 to 25.5 kph). Important: If you select a number that limits the miles per hour, your change will not affect the kilometers per hour (and vice versa). The treadmill does not convert the speed entered in mph (U.S. standard) to kph (Metric). It stores separate numbers for the different units of measure. To enter both values, you must first reset the display to the appropriate unit of measure, and then change the speed limit in this program. Refer to Selecting a U.S. Standard or Metric Display. 1. At the SET SPEED LIMIT prompt, press OK. Use the navigational arrow keys to select the desired running belt speed limit. 2. When you are ready, press OK to accept the displayed setting and move to the next feature. For other options, refer to the table in Accessing Club Programming Mode and Changing the Settings. Product Owner's Manual: Club Features Treadmill: Setting an Incline Limit You can set the maximum grade (percent of incline) for the treadmill. This limits the degree of incline and, consequently, the number of incline settings that are available to the user. The available range is: Treadmill Percent of Incline C956i 0 to 15% grade C966i -3 to 15% grade 1. At the SET INCLINE LIMIT prompt, press OK. Use the navigational arrow keys to select the desired grade. 2. When you are ready, press OK to accept the displayed setting and move to the next program. For other options, refer to the table in Accessing Club Programming Mode and Changing the Settings. 23 Treadmill: Accessing Performance Programs Note: This feature is not available on the 946i treadmill. Several performance-based programs on the treadmill can be hidden from the user’s view and, consequently, be unavailable during an exercise session. These programs are shown in the following list: Gerkin Fitness Test, USAF PRT, NAVY PRT, ARMY PFT, USMC PFT, Federal Law Enf. PEB. If you keep the default factory setting, the Track and 5K programs are available to the user through the PERFORMANCE key. Product Owner's Manual: Club Features If you wish to change this setting, perform the following steps: 1. Press OK to review the current HIDDEN PROGRAMS selection. Use the navigational arrow keys to alternate between the two selections. Setting Description SHOW PROGRAMS Causes all the Performance Programs listed above to appear. The user can access each program through the PERFORMANCE key on the display. HIDE PROGRAMS Hides the Performance Programs listed above and makes them inaccessible to the user. However, the Track and 5K programs remain available and are accessed when a user presses the PERFORMANCE key. 2. When you are ready, press OK to accept the displayed setting and move to the next program. For other options, refer to the table in Accessing Club Programming Mode and Changing the Settings. 24 Treadmill: Changing Remote Control Access Important: To affect this setting, the treadmill must be connected to a computer and you will need to be familiar with CSAFE commands. When you enable this program, you can set a user’s speed and incline through a computer software program which interfaces with the CSAFE port on the treadmill. The default factory setting is set to DISABLED. To change this setting, perform the following steps: Product Owner's Manual: Club Features 1. AttheREMOTE SPEED CO N T RO L prompt, press OK. Use the navigational arrow keys to alternate between the two selections. Setting Description ENABLED Lets you set the speed and incline for individual users and their selected program using CSAFE commands through a computer connection. DISABLED Disconnects remote access so you cannot use the remote capabilities of a CSAFE connection. You would also use this setting when the treadmill is not connected to a computer. 2. When you are ready, press OK to accept the displayed setting and move to the next program. For other options, refer to the table in Accessing Club Programming Mode and Changing the Settings. 25 EFX: Changing the Auto-Level Setting You can set a specific ramp incline so that the EFX automatically returns to it at the end of a workout session. Whatever incline you set, the EFX ramp returns to the setting if a user continues pedaling, once the program session has ended, and presses RESET to return to the Precor banner. Note: This setting is available on equipment with adjustable ramps. Important: If you use this feature, connecting the optional power adapter is recommended. Instruct users about the auto-leveling feature and ask that they hold onto a stationary handrail with one hand while the equipment automatically moves to the set incline. Product Owner's Manual: Club Features 1. Atth...

Baixe o seu

Para fazer o download, introduza 2 dígitos :