Assessments - 5, GPA: 4.4
(
)
)
|
Facilidade de uso
Always wear athletic shoes. 8. The total weight of the user and the added weights should not exceed 300 pounds. 9. Use the AEROBIC RIDER 2 only as described in this manual. 10. The AEROBIC RIDER 2 is intended for home use only. Do not use the AEROBIC RIDER 2 in any commercial, rental, or institutional setting. WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. SEARS assumes no responsibility for personal injury or property damage sustained by or through the use of this product. 2 BEFORE YOU BEGIN Thank you for selecting the new HEALTHRIDER® AEROBIC RIDER 2. The AEROBIC RIDER 2 offers a unique form of low-impact exercise that uses both the upper body and the lower body for greater cardiovascular benefits and increased toning. For your benefit, please read this manual carefully before using the AEROBIC RIDER 2. If you have additional questions, please call our toll-free HELPLINE at 1-800-736-6879, Monday through Handlebar Saturday, 7 a.m. until 7 p.m. Central Time (excluding holidays). To help us assist you, please note the product model number and serial number before calling. The model number is 831.287943. The serial number can be found on a decal attached to the AEROBIC RIDER 2 (see the front cover of this manual). Before reading further, please review the drawing below and familiarize yourself with the parts that are labeled. Padded Seat Upper Pedals Seat Knob (Behind Sideshield) Lower Pedal Monitor Weight Tube Weight Collar Weight Center Post 3 ASSEMBLY Before beginning assembly, carefully read the • Tighten all parts as you assemble them, unless following information and instructions: instructed to do otherwise. • Assembly requires two persons. • During assembly, make sure that all parts are oriented as shown in the drawings. • Place all parts in a cleared area and remove the packing materials; do not dispose of the packing THE FOLLOWING TOOLS (NOT INCLUDED) materials until assembly is completed. ARE REQUIRED FOR ASSEMBLY: • Read each assembly step before you begin. • Two (2) adjustable wrenches • To identify the small parts used in assembly, use • Lubricant, such as petroleum jelly or grease, the part identification chart below. The num-will also be required. ber in parenthesis below each part refers to the key number of the part. The second number Assembly will be more convenient if you have the refers to the quantity needed for assembly. Note: following tools: A socket set, a set of open-end or Some parts may have been pre-attached for closed-end wrenches, and a rubber mallet. shipping purposes. If a part is not in the parts bag, check to see if it has been pre-attached. Rubber Washer (51)–4 Frame Axle (13)–2 (External Thread) M6 Hex Nut (54)–4 M8 Nylon Jam Nut (7)–2 M6 Flat Washer (55)–4 M8 x 1.375” Bolt (17)–1M6 x 60mm Bolt (53)–4 Plastic Washer (49)–2 M8 x 120mm Bolt ...
Este manual também é adequado para os modelos :Formadores - 831.287943 (698.11 kb)
Formadores - 831.287943 (698.11 kb)
Formadores - 831.287943 (698.11 kb)
Formadores - 831.287943 (698.11 kb)