Assessments - 3, GPA: 3
(
)
)
|
Facilidade de uso
5. Keep hands away from all moving parts. 6. Always wear appropriate workout clothing when exercising. DO NOT wear robes or other clothing that could become caught in the machine. Running or aerobic shoes are also required when using the machine. 7. Use the machine only for its intended use as described in this manual. DO NOT use attachments not recommended by the manufacturer. 8. Do not place any sharp object around the machine. 9. Disabled person should not use the machine without a qualified person or physician in attendance. 10. Before using the machine to exercise, always do stretching exercises to properly warm up. 11. Never operate the machine if the machine is not functioning properly. WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. IMPEX INC. ASSUMES NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT. SAVE THESE INSTRUCTIONS. 2 3 ASSEMBLY INSTRUCTION Tools Required Assembling the Machine: Adjustable Wrench and Allen Wrench NOTE: It is strongly recommended this machine to be assembled by two or more people to avoid possible injury. STEP 1 (See Diagram 1) A.) Attach the Main Frame (#1) to the Rear Stabilizer (#5). Secure it with two M10 x 3 .” Carriage Bolts (#6), . .” Washers (#3) and M10 Aircraft Nuts (#2). B.) Attach the Main Frame (#1) to the Front Stabilizer (#32). Secure it with two M10 x 3 .” Carriage Bolts (#6), . .” Washers (#3) and M10 Aircraft Nuts (#2). DIAGRAM 1 4 STEP 2 (See Diagram 2) A.) Attach two Brass Bushings (#8) to the Support Frame (#9). Secure it to the rear bracket on the Main Frame (#1) with one M10 x 3 .” Allen Bolt (#33), two . .” Washers (#3), and one M10 Aircraft Nut (#2). Do not over tighten the bolt. B.) Insert the Hyper Adjustment Frame (#12) into the Support Frame (#9). Insert a Lock Knob (#10) into the selected hole to lock it and obtain the desired height. C.) Attach two Brass Bushings (#8) to the Akimbo Frame (#14). Secure it to the front open bracket on the Main Frame (#1) with one M10 x 3 .” Allen Bolt (#33), two . .” Washers (#3), and one M10 Aircraft Nut (#2). Do not over tighten the bolt. D.) Attach two Brass Bushings (#8) to the Hyper Adjustment Frame (#12). Attach it to the open bracket on the Akimbo Frame (#14). Secure it with one M10 x 3 3/8” Allen Bolt (#13), two . .” Washers (#3), and one M10 Aircraft Nut (#2). E.) Insert the Handle Adjustment Frame (#16) into the top opening on the Akimbo Frame (#14). Insert a Lock Knob (#10) to selected hole to lock it and obtain the desired height. F.) Insert the Foot Adjustment Frame (#24) into the opening on the Akimbo Frame (#14). Insert a Lock Knob (#10) to secure it. DIAGRAM 2 5 STEP 3 (See Diagram 3) A.) Attach the two Upholstery Pads (#20) to the Handle Adjustment Frame (#16). Secure each pad with two M8 x 1 .” Allen Bolts (#18) and . .” Washers (#17). B.) Attach the Foot Plate (#26) to the Akimbo Frame (#14). Securely tighten it with two M10 x 1 3/4” Allen Bolts (#25), . .” Washers (#3), and M10 Aircraft Nuts (#2). C.) Insert one Foam Tube (#23) halfway through the hole on the Foot Adjustment Frame (#24). Insert one Foam Tube halfway through the hole on the Akimbo Frame (#14). Push four Foam Rolls onto the Tubes. Plug four . 1” Foam Roll End Caps (#21) to each end of Foam Roll. DIAGRAM 3 6 7 PARTS LIST KEY NO. DESCRIPTION Q’ty Main Frame 1 M10 Aircraft Nut 9 . .” Washer 14 2” x 2 .” End Cap 4 Rear Stabilizer 1 M10 x 3 .” Carriage Bolt 4 2” Square End Cap 2 Brass Bushing 6 Support Frame 1 Lock Knob 3 Sleeve 3 Backrest Adjustment Frame 1 M10 x 3 3/8” Allen Bolt 1 Akimbo Frame 1 Handle Grip 2 Handle Adjustment Frame 1 . .” Washer 8 M8 x 1 1/8” Allen Bolt 4 1 .” Square End Cap 3 Upholstery Pad 2 . 1” Foam Roll End Cap 4 Foam Roll 4 Foam Tube 2 Foot Adjustment Frame 1 M10 x 1 3/4” Allen Bolt 2 Foot Plate 1 2” Square End Cap 1 M8 x 1 5/8” Allen Bolt 2 Roller Wheel 2 M8 Aircraft Nut 2 M10 Round Allen Bolt 4 Front Stabilizer 1 M10 x 3 .” Allen Bolt 2 M10 x 1” Allen Bolt 1 8 IRON GRIP SPORT By IMPEX FITNESS PRODUCTS LIMITED LIFE TIME WARRANTY IMPEX FITNESS PRODUCTS ("IMPEX") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of LIFE TIME on the Frame and Weld, 3 YEARS on parts, and 6 MONTHS on upholstery from the date of purchase. This warranty extends only to the original purchaser. IMPEX's obligation under this Warranty is limited to replacing or repairing, at IMPEX's option. All returns must be pre-authorized by IMPEX. Pre-authorization may be obtained by calling IMPEX Customer Service Department at 1-800-999-8899. All freights on products returned to IMPEX must be prepaid by the customer. This warranty does not extend to any product or damage to a product caused by or attributable to freight dama...