Assessments - 4, GPA: 3.5
(
)
)
|
Facilidade de uso
ADD-ON KIT p v\»\ I ||| [ ASSEMBLY INSTRUCTIONS J Part # 6827301 1 Revision: 3/30/99 PARTS LIST KEY PART # DESCRIPTION QTY KEY PART # DESCRIPTION QTY 1 6284501 20 HOLE WEIGHT STACK SHAFT 1 3 6198501 WEIGHT STACK LABEL (1-25) 1 2 6382301 WEIGHT PLATE BUSHING 10 CT 1 4 6214501 WEIGHT PLATES 5 • Snap two WEIGHT PLATE BUSHINGS (3) into the top of all five WEIGHT PLATES (6) as shown in FIGURE 1. 2 STEP 2: • Remove the WEIGHT STACK SELECTOR PIN from the WEIGHT STACK as shown in FIGURE 2. • Unthread the CABLE from the WEIGHT STACK SHAFT of the HEAD PLATE as shown in FIGURE 2. • Remove or loosen the TOP BOOM or GUIDE ROD SUPPORT. (Refer to Home Gym instructions) • Tilt the GUIDE RODS back and remove the HEAD PLATE ASSEMBLY, fifteen WEIGHT PLATES, two WEIGHT STACK CUSHIONS, two 3/4” WASHERS, and two WEIGHT STACK SPACERS as shown in FIGURE 1. (NOTE: Please discard the two 3/4” WASHERS, and the two WEIGHT STACK SPACERS.) • Unbolt the old WEIGHT STACK SHAFT from the HEAD PLATE. (NOTE: Please discard the old WEIGHT STACK SHAFT.) 1/2 1/2 1/2 1/2 1/2 1/2 0 I_L J_I_L 2 J_I_L 3 J_L 4 J_I_L 5 J_I_L 6 J_I 3 STEP 4: • SECURELY assemble the 20 HOLE WEIGHT STACK SHAFT (1) to the HEAD PLATE. (NOTE: The bolt hole in the HEAD PLATE should be on top.) • Insert the two GUIDE ROD S through the two WEIGHT STACK CUSHIONS into the base as shown in FIGURE 3. Lubricate the GUIDE RODS with a silicon or teflon spray that is available at most hardware stores. • USING EXTREME CARE, slide the five new WEIGHT PLATES (4) and the previous fifteen WEIGHT PLATES down over the GUIDE RODS onto the WEIGHT STACK CUSHIONS. (NOTE: Make sure that the key holes of the WEIGHT PLATES all face the same way.) • Carefully Slide the new HEAD PLATE ASSEMBLY down over the GUIDE RODS onto the weight stack as shown in FIGURE 3. • Attach the WEIGHT STACK LABELS (3) (#16-20) to the five WEIGHT PLATES (4) as shown on FIGURE 3. • Screw the CABLE into the WEIGHT STACK SHAFT of the HEAD PLATE until the CABLE slightly pulls on the HEAD PLATE. • TIGHTEN jam nut securely! • SECURELY tighten all loose connections. Thank you for purchasing the Parabody 359101 50 LB. ADD-ON KIT. If unsure of proper use of equipment, call your local LifeFitness distributor or call the Parabody customer service department at (800) 328-9714. 4...