Assessments - , GPA:
(
)
)
Fabricante : HP
Arquivo Tamanho: 360.51 kb
Arquivo Nome :
Língua de Ensino: 
O documento está colocado, por favor, espere
 |
O documento está colocado, por favor, espere
por este dispositivo também tem outras instruções :
Facilidade de uso
Front panel
Installing the server into the rack
5
CAUTION: Always install the heaviest item first, and continue
to populate the rack from the bot om to top.
6
7
1. Install the server and cable management arm. See the
8
installation instructions that ship with the 2U Quick Deploy Rail
System. If you chose not to install the cable management arm,
3
4
9
install the power cord anchor to the server.
10
IMPORTANT: When using cable management arm
components, ensure that there is enough slack in each of the cables
to prevent damage to the cables when the server is extended from
the rack. If using the power cord anchor, ensure that there is enough
slack in the power cord so that the redundant power supply can be
2
1
removed without disconnecting the power cord from the primary
1 Hard drive bays
2 USB port
power supply.
3 Diskette drive bay
4 DVD/CD-ROM drive
5 Internal health LED
6 External health LED
2. Install the MSA cables, as shown, and any peripheral devices.
7 NIC 1 link/activity LED
8 NIC 2 link/activity LED
9 UID LED but on
10 Power on/standby
button/system power LED
Back panel
To MSA array
13
14
10680
68 B
0
1
2
3
4
5
6
3. Connect the power cord to the back of the server.
4. Secure cables to the cable management arm, if installed.
WARNING! To reduce the risk of electric shock or damage to
the equipment, connect the VHDCI connector on the controller
module to the external connector of a sixth-generation Smart Array
Control er on the server.
12
11 10
9
8
7
15
16
Starting the DP Storage Server
1067
6 9B
To begin the first-time startup procedure:
1 Non-hot-plug PCI-X expansion 2 Smart Array 6402 128 MB
slot 3, 64 bit/100 MHz, bus B
RAID controller
• Ensure that the server is safely installed in an adequate
environment.
3 Serial connector
4 iLO connector
• Ensure that the power cables and peripheral devices are
5 Mouse connector
6 Power cord connector
plugged in, and that AC power is supplied to the server.
7 Keyboard connector
8 NIC 1 connector
• See the DP Storage Server startup chapter in the HP ProLiant
9 NIC 2 connector
10 USB connectors
Data Protection Manager Server user guide.
11 Video connector
12 VHDCI SCSI connector (port 1)
13 RJ-45 link LED
14 RJ-45 activity LED
15 UID LED
16 Power supply LEDs
Page 2
...