Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
WARNING!
NOTE:
Ensure that the rack is level and stable before working on the
If installing rails into a square hole rack, use
rack. Be sure the leveling jacks (feet) extend to the floor and
larger-sized shoulder screws and pins for mounting.
that the full weight of the rack rests firmly on the floor.
If installing rails into a round hole rack, use
smaller-sized shoulder screws and pins for
mounting.
WARNING!
Ensure that the rack has anti-tip measures in place. Such
measures may include floor-bolting, anti-tip feet, ballast, or a
combination of these as specified by the rack manufacturer and
applicable codes.
WARNING!
Ensure that sufficient personnel are on hand to support the
product(s) during the installation process. Use of the appropriate
lifting device is recommended as an installation aid.
WARNING!
Figure 1 Attach the rails to the rack columns
Always load the rack from the bottom up. Load the heaviest
3.
Slide the server into position on the rails (step 3 in Figures 2, 3).
items in the rack first. This makes the rack bottom-heavy and
helps prevent it from becoming unstable.
NOTE:
The rear ends of the rails have a CTO bracket that
must overlap the chassis tab in order to secure the
WARNING!
server to the rails (Figure 4).
Do not overload the branch circuit that provides power to the
rack. The total rack load should not exceed 80 percent of the
branch circuit rating.
Mounting the server
1.
Position left and right rack rails at the desired 'U' position in the
rack (step 1 in Figure 1).
NOTE:
The rails can be adjusted to fit the rack.
2.
Secure rack rails to the front and back rack columns using screws.
Make sure that the shoulders of the screws fit inside the square or
round holes of the rack (step 2 in Figure 1).
Page 2
...