Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
HP StorageWorks X3000 G2
IMPORTANT:
Network Storage System Quick
Supported storage systems
Power on and complete the configuration
Only the direct attach and remote management access methods
can be used to install the storage system. After the storage system
1.
Power on the system by pushing the power button on the front panel.
Start Guide
These installation instructions apply to the following HP StorageWorks
installation process is complete and the system's IP address has
If using iLO, click Momentary Press on the Power Management page
Network Storage System models:
been assigned, you can then additionally use the remote browser
to power on the server, then click Launch on the Status Summary
page to open the iLO Integrated Remote Console and complete the
• HP StorageWorks X3400 G2 Network Storage Gateway
and remote desktop methods to access the storage system.
installation process.
• HP StorageWorks X3800 G2 Network Storage Gateway
The storage system starts and displays an HP Network Storage
• Direct attach — Connect a monitor, keyboard, and mouse directly to
System installation screen. The storage system installation process
Supporting documentation
the storage system. This access method is mandatory if your network
takes approximately 10–15 minutes.
does not have a Dynamic Host Configuration Protocol (DHCP) server.
The following documentation provides additional information about using
• Remote management — Access the storage system using the Integrated
NOTE:
your HP Network Storage System. To obtain this documentation, Go to
Lights-Out remote management method:
http://www.hp.com/go/nas, select your product family, select your
1.
Ensure that a network cable is connected to the iLO port located
Your storage system comes pre-installed with the
product model, click HP Support & Drivers, and then click Manuals.
on the back of the storage system.
Microsoft Windows Storage Server 2008 R2 operating
system. There is no operating system installation
• HP StorageWorks X3000 G2 Network Storage System User Guide
2.
Locate the iLO Network Settings tag attached to the storage
required.
This document covers the HP StorageWorks X3000
system and record the default user name, password, and DNS
• HP Rack Rail Kit Installation Instructions
Generation 2 (G2) Network Storage System models
name.
• HP ProLiant Servers Troubleshooting Guide
X3400 and X3800.
3.
From a remote computer, open a standard Web browser and
• HP Integrated Lights-Out 2 User Guide
When the storage system installation process nears completion, the
enter the iLO management hostname of the storage system.
• HP ProLiant Integrated Lights-Out 3 User Guide
Windows Storage Server 2008 R2 desktop displays the following
message: The user's password must be changed before logging on
the first time. Log on to the storage system by establishing an
NOTE:
IMPORTANT:
Administrator password:
By default, iLO obtains the management IP address
Included with your storage system is the HP StorageWorks
and subnet mask from your network’s DHCP server.
2.
Click OK.
Storage System Recovery DVD. This DVD is used to restore the
The hostname found on the iLO tag is automatically
3.
Type an Administrator password in the New password box.
system to factory defaults. Keep this DVD in a safe place.
registered with your network’s DNS server.
4.
Re-type the Administrator password in the Confirm password box.
5.
Click the blue arrow next to the Confirm password box.
4.
Using the default user information provided on the iLO Network
Settings tag, log on to the storage system.
6.
Click OK.
© Copyright 2010 Hewlett-Packard Development Company, L.P.
Install the storage system hardware
After the Administrator password has been set, the storage system
For detailed instructions on using each of these access methods, see the
completes the installation process.
First edition: November 2010
1.
Install the rail kit by following the HP Rack Rail Kit Installation
HP StorageWorks X3000 G2 Network Storage System User Guide,HP
Instructions.
Integrated Lights-Out 2 User Guide, or HP ProLiant Integrated Lights-Out
7.
When prompted, press CTRL+ALT+DELETE to log on to the system.
The information in this document is subject to change without notice.
For more information, go to http://www.hp.com/go/nas, select
3 User Guide.
If using iLO, on the iLO Integrated Remote Console tab, click the
button labeled CAD and then click the Ctrl-Alt-Del menu item.
Microsoft, Windows, Windows XP, and Windows NT are U.S.
your product family, select your product model, click HP Support &
registered trademarks of Microsoft Corporation.
Drivers, and then click Manuals.
The HP StorageWorks Initial Configuration Tasks window launches
www.hp.com
2.
If connecting to the storage system using the direct attach method,
automatically on logon. Use this tool to perform setup tasks such as setting
connect the following cables to the back panel of the storage system
the time zone, network configuration, changing the computer name, and
in the following sequence: keyboard, mouse, network cable, monitor
joining a domain. When the HP StorageWorks Initial Configuration Tasks
cable, and power cable.
window is closed, HP Server Manager is launched automatically. Use
HP Server Manager for further customizing of the storage system, such
as adding roles and features, and share and storage management.
NOTE:
After the storage system installation process is complete, you can use the
The keyboard, mouse, and monitor are not provided
remote browser and remote desktop methods to access and configure
with the storage system.
the storage system. See the HP StorageWorks X3000 G2 Network
Storage System User Guide for more information about using these access
methods.
3.
If connecting to the storage system using the remote management
method, connect a network cable to a data port, a network cable
to the iLO port, and power cable.
Access the storage system
Use either the direct connect or remote management method to connect
to the storage system.
*5697-0610*
... Este manual também é adequado para os modelos :
dados de dispositivos de processamento - HP StorageWorks X3800 Network Storage Gateway (118.2 kb)
dados de dispositivos de processamento - HP StoreEasy 3830 Gateway Storage (118.2 kb)
dados de dispositivos de processamento - HP StoreEasy 3830 Gateway Storage/S-Buy (118.2 kb)
dados de dispositivos de processamento - HP StoreEasy 3840 Gateway Storage (118.2 kb)