Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
IMPORTANT:
Preparation
See the storage system administration guide for additional
information.
1.
Ensure that a known, good system backup is available.
2.
Schedule a maintenance window.
3.
From the servers, prepare to stop all access to the enclosure.
(Optional in dual controller configurations.)
Error codes
The seven-segment display indicates Power On Self Test (POST) and
system status information. During normal operation the display will read
Step 1: Removing the controller
“on.”
CAUTION:
Do not remove a controller from the chassis while the controller
status LED is green. Removing an active controller (green LED)
may result in data loss.
1.
From the servers, stop all access to the enclosure. (Optional in dual
controller configurations.)
2.
Label each cable connected to the controller with its port number.
This ensures proper re-connection after completing the cache module
replacement.
3.
Remove the cables from the controller.
4.
Remove the controller from the chassis:
a.
Squeeze the controller thumb latch (1) and rotate the latch
Error codes consist of four characters, but only two characters are
handle down (2).
displayed at a time. Pressing the up or down arrow button on the
seven-segment display shows the remaining characters.
b.
Pull the controller straight out of the chassis (3).
The first character represents the domain code:
• C—Configuration error
IMPORTANT:
• F—Firmware error
As you pull the controller out of the enclosure, keep
• H—Hardware error
it level until it is completely out of the chassis. If the
controller is tilted, it is possible to catch a
The second character indicates the controller signalling the error:
component on the chassis edge and damage the
• 1—Controller 1
controller.
• 2—Controller 2
The third and fourth characters indicate the specific error on the controller:
(Displayed by pressing the up or down arrow button on the
seven-segment display.)
Table 1 Memory error codes
Code
Description
H130
Controller 1, Fatal ECC error
H230
Controller 2, Fatal ECC error
For more information on the displayed codes, see the X9700 Storage
System controller user guide.
nl
nl
Carton contents
• 512MB DIMM memory module
• Cache module retention clip
• Package of rubber spacers (2)
Page 2
... Este manual também é adequado para os modelos :
dados de dispositivos de processamento - HP IBRIX X9320 10GbE Performance Block (319.1 kb)
dados de dispositivos de processamento - HP IBRIX X9320 IB Performance Block (319.1 kb)
dados de dispositivos de processamento - HP StoreAll 8800 Storage Node (319.1 kb)
dados de dispositivos de processamento - HP StoreAll 9320 1GbE Storage Node Pair (319.1 kb)