Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
dados de dispositivos de processamento - HP 41B 4Gb 1-port PCIe Fibre Channel Host Bus Adapter (1.25 mb)
dados de dispositivos de processamento - HP 41B 4Gb 1-port PCIe Fibre Channel Host Bus Adapter (153.08 kb)
dados de dispositivos de processamento - HP 41B 4Gb 1-port PCIe Fibre Channel Host Bus Adapter (301.79 kb)
Facilidade de uso
Recommendations and considerations
For optimal performance, HP recommends the following:
•
Use zoning by HBA, as described in the HP SAN Design Reference Guide, available at http://
www.hp.com/go/sdgmanuals.
•
For information and best practices for configuring SANs, see the HP SAN Design Reference
Guide, available at http://www.hp.com/go/sdgmanuals.
Product compatibility
Consider the following:
•
HP requires that the HBA BIOS be disabled on HBAs that are not part of BFS.
•
HP-branded Brocade HBAs have the default BIOS option set to Auto Discovery. If you do
not want to use this feature, change the BIOS option to Flash. For more information, see the
Brocade Adapters Installation and Reference Manual, Configuring boot over SAN section.
NOTE:
HP recommends that you not use the Boot first LUN option.
•
Do not load BIOS versions 3.0.3.0 or 3.0.3.4 on a server configured for direct connect to
the P2000 G3 MSA.
•
If you have an MSA2000/2300 configured with LUN 0 as a data LUN, you must reboot to
discover LUN 0.
•
Heterogeneous vendor Fibre Channel HBAs are not supported on the same server.
•
BFS is not supported with the DL165 G7.
Windows
•
Windows requires the following hotfixes:
◦
Windows 2003 R2 SP2 with QFE932755 – x86 and x64
◦
Windows 2008 and Microsoft native MPIO DSM with QFE976748 – x86 and x64
•
HP recommends that you install the following hotfixes:
◦
Windows 2003 R2 SP2 with QFE943545 - x86 and x64
◦
Windows 2008 with QFE968675 - x86 and x64 (unless you have already installed
QFE976748)
•
HP recommends that you set the MSA2x00 path timeout value for Windows to 60 using the
Host Connectivity Manager as follows:
1.
Right-click the HBA.
2.
From the menu, select Port Configuration→Basic.
3.
Ensure that the MPIO mode enable box is not selected.
4.
Change the path timeout value to 60.
•
Capturing a complete kernel and memory dump on Windows systems can fail if the memory
size is greater than the allocated dump size. For more information, see the Microsoft KB article,
available at http://support.microsoft.com/kb/254649.
Linux
•
In multipathing configurations for Linux servers, HP recommends that you set the timeout value
to 14 seconds for driver version 2.x.x.x or later as follows:
# bcu fcpim --pathtov port_ID 14
•
ReiserFS file systems can exhibit unexpected behavior under heavy loads. For up-to-date
recommendations, see the Novell Support website http://support.novell.com/.
Important notes and workarounds
5
... Este manual também é adequado para os modelos :
dados de dispositivos de processamento - HP 42B 4Gb 2-port PCIe Fibre Channel Host Bus Adapter (189 kb)
dados de dispositivos de processamento - HP 81E 8Gb 1-port PCIe Fibre Channel Host Bus Adapter (189 kb)
dados de dispositivos de processamento - HP 81E 8Gb 1-port PCIe Fibre Channel Host Bus Adapter/S-Buy (189 kb)
dados de dispositivos de processamento - HP 81Q 8Gb 1-port PCIe Fibre Channel Host Bus Adapter/S-Buy (189 kb)