Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
dados de dispositivos de processamento - HP StorageWorks Director 2/64 base 32 port config (4.99 mb)
dados de dispositivos de processamento - HP StorageWorks Director 2/64 base 32 port config (187.8 kb)
dados de dispositivos de processamento - HP StorageWorks Director 2/64 base 32 port config (317.15 kb)
Facilidade de uso
Management server and client ports
TABLE 4
Trial and Licensed Version ports (Continued)
Port Number Ports
Transport
Description
Communication Path Open in Firewall
24610
jboss.jrmp.invoker.port - port 10
TCP
RMI/JRMP invoker port
Client–Server
Yes
24611
jboss.pooled.invoker.port - port 11
TCP
Pooled invoker port
Client–Server
Yes
24612
jboss.connector.socket.port - port 12
TCP
Socket invoker port
Server
No
24613
jboss.web.ajp.port - port 13
TCP
AJP 1.3 connector port
Server
No
24614
jboss.web.service.port – port 14
TCP
Web service port
Server
No
24615
connector.bind.port – port 15
TCP
Port to listen for requests on
Server
No
5555510
Client Export Port
TCP
Client port to which server
Server–Client
Yes
pushes the M-EOS device
Element Manager updates
55556
Launch in Context (LIC) client hand
TCP
Client port used to check if a
Client
No
shaking port
Management application client
opened using LIC is running on
the same host
NOTE: If this port is in use, the
application uses the
next available port.
1
Port is not configurable (either in the switch or the Management server).
2
Every FTP session requires an additional port which is randomly picked. If the firewall is enabled then FTP operation (used for firmware
download, technical support, firmware import (from client-server) and so on.) will fail.
3
Ports configurable in the switch and the Management server. Port must be the same for all switches managed by the Management
server.
4
Ports used to launch the Web Tools application for Fabric OS switches from the Management client. This is applicable only when the
Fabric OS version is earlier than 6.1.1.
5
Port used for SSL communication. If SSL is enabled, you must open 443*, 24604, and 24605 in the firewall. If SSL is not enabled, port
80* must be open in the firewall and 443*, 24604, and 24605 can be closed. An asterisk (*) denotes the default web server port number.
If you set the web server port number to a port other than the default, you must open that port in the firewall.
6
The Syslog listening port is configurable in the Management server. The switch always sends syslog messages to port 514. If you have
any other syslog daemon on the Management server machine already listening to 514, then the Management Server can be configured
to listen to a different port. You must manually configure relay in existing syslogd to forward the syslog messages to the Management
Server listening on the configured port.
7
Ports used for communicating with M-EOSn (M-i10K) directors. M-i10K always uses NMRU over SSL (2049). M-i10K always uses 8080
for http requests (firmware download, configuration backup/ restore, data collection). If M-EOSn firmware version is less than 9.1 the
Management application uses 8080 for XML-RPC requests (discovery and asset collection). If the M-EOSn firmware version is more
than 9.1 then it always uses SSL port (4430) for XML-RPC.
8
Port must be opened in firewall for the server when the remote ODBC client needs to talk to the Management database server (Only for
EE). The same port is used by the Management server to database server (local). This is not used by the Management client.
9
Ports used for communicating with M-EOS (excluding M-i10K) switches (only required when the Management server manages M-EOS
switches).
10
Port should be opened in firewall in the Management client to allow communication between server and client (only applicable for
M-EOS switches). If this port is not opened in the firewall, then the M-EOS element manager does not receive updates. Also if multiple
clients are opened, it will try to use the next available port (55556). So if there are n clients opened in the same machine then you must
open 55555 (configurable) to 55555 + n ports in the firewall.
11
The Management server tries to find a contiguous block of 16 ports from the starting port configured (for example, 24600); if any port in
this range is not available for the Management application, then you must provide a new starting port. Note that Port 1 to Port 15 in
“Ports” column of the table above are not separately configurable and those ports vary based on the starting port number configuration
(specified as Port 0 in the above table). The port numbers mentioned in the table above are the default ports (for example, when 24600
is selected as the starting port number).
12 of 82
Brocade Network Advisor Migration Guide
53-1002321-01
... Este manual também é adequado para os modelos :
dados de dispositivos de processamento - HP StorageWorks Director 2/64 (509.06 kb)