|
por este dispositivo também tem outras instruções :
Facilidade de uso
ESL E-Series
HP
Cross Link
StorageWorks
Controller
Replacement
Caution: Parts can be damaged by
Caution: This part is not hot-pluggable.
electrostatic discharge. Keep parts in their
It is necessary to power down the primary
containers until needed. Ensure that you
cabinet and the CLM controller to replace
are properly grounded when touching
this part.
static sensitive components.
1
2
ESL E-Series
Cross Link
HP
Controller
Replacement
StorageWorks
ot-pluggable.
Caution: This part is not h
It is necessary to power down the primary
cabinet to replace this part.
Caution: Parts can be damaged by
electrostatic discharge. Keep parts in their
hen touching
containers until needed. Ensure that you
are properly grounded w
static sensitive components.
2
1
E
S
L
E
-
S
eries
C
r
osslink
C
ontrol er
H
P
R
e
placement
C
a
ution: This part is not hot-pluggable.
I
t
i
s necessary to power down the library to
S
to
rageWorks
r
e
p
l
ace this part.
C
a
ution: Parts can be damaged by
e
l
e
ctrostatic discharge. Keep parts in their
c
ontainers until needed. Ensure that you
are properly grounded when touching
2
s
t
a
t
i
c sensiti components.
P
o
w
er off the library:
a
.
U
se your backup software to empty the
picker or to verify that the picker is empty.
1
b
.
P
ress and hold the power but on, located
on the front of the library behind the laptop
t
r
a
y
, until the front panel goes blank.
4
I
n
s
p
ect the contents of the kit. You wil also need
P
h
i
l
ips screwdriver.
a
3
O
n
the primary cabinet, flip the two breaker switches
o
f
f
(
to the left) at the power distribution unit.
O
p
en the back door of the primary cabinet.
Open the back door of the primary cabinet.
f the kit. You wil also need
I
nspect the contents o
a #1 Phillips screwdriver.
4
3
Power off the cabinets:
a. Use your backup software to empty the
picker or to verify that the picker is empty.
b. Press and hold the power button, located
on the front of the cabinet behind the
laptop tray, until the front panel goes blank.
Power off the Cross Link robotics control er
(CLM control er) using the switches on the two
CLM control er power supplies.
Inspect the contents of the kit. You also need a
#2 Phillips screwdriver.
Open the back door of the primary cabinet.
3
4
Power off the primary cabinet:
a. Use your backup software to empty the
picker or to verify that the picker is empty.
b. Press the power button, located on the front
of the cabinet behind the laptop tray. Wait
for the front panel to go blank.
On the primary cabinet, flip the two breaker switches
off (to the left) at the power distribution unit.
... Este manual também é adequado para os modelos :
dados de dispositivos de processamento - HP ESL 712e Ultrium Tape Library (1.3 mb)
dados de dispositivos de processamento - HP StorageWorks ESL 286e 286 Slot SDLT Library (1.3 mb)
dados de dispositivos de processamento - HP StorageWorks ESL 286e SDLT Tape Library (1.3 mb)
dados de dispositivos de processamento - HP StorageWorks ESL 322e 322 Slot Ultrium Library (1.3 mb)