Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
3.
Make appropriate changes to the System2 NIC name(s) using NCT or Control Panel if you
find matching or conflicting names. This is to make sure that no two NIC adapters have
similar names while importing the XML file.
4.
Import the NCTConfig.xml.
TIP:
You can also configure System2 using the Network Configuration Tool without using the
configuration details available in the NCTConfig.xml file. For more information, see the
Administrator Guide.
Pool Manager
•
If you use HPSSA (HP Smart Storage Administrator) to create one or more pools and then use
Pool Manager to grow a pool, Pool Manager may report that the operation failed even though
it actually succeeded. This can occur if parity initialization is still in progress on the newly created
pool. HP recommends that you use Pool Manager for all operations on storage pools.
Workaround: If this occurs, refresh Pool Manager and verify the drive count on the pool. It is
likely that the grow operation has succeeded despite the error report. Alternatively, you can retry
the grow operation after parity initialization on the new pool is complete.
•
On the StoreEasy 1000, if a LUN with a RAID level of 1, 0, or 1+0 is extended, the corresponding
LUN transformation job is not displayed in the View Jobs tab of Pool Manager.
Workaround: Open the HPSSA and view the job status for the affected LUN.
•
Launching Pool Manger using HTMLViewerWrapper takes more time than launching it using
Internet Explorer.
•
The firmware version of the embedded controller is not displayed in the Overview tab.
Workaround: This is a known issue.
System installation and recovery
•
The Internet Printing Client features are not installed by default with the operating system.
Workaround: Use Windows Server Manager to manually install these features:
1.
Select Features and then click Add Features.
2.
Select Internet Printing Client in the features list.
3.
Click Next and complete the Add Features Wizard installation process.
•
The time zone selected during the image process is not retained. The image process allows you
to set the time zone; however, the time zone is always set to Pacific time when the operating
system comes up for the first time.
Workaround: Change the time zone after the system is fully imaged.
Windows Server Manager
•
In Windows Server Manager, the Repair Virtual Disk option is unavailable.
Workaround: When a virtual disk fails, you cannot use the Repair Virtual Disk option in Windows
Server Manager to fix it because the option is unavailable. Nor can you use the
Repair-VirtualDisk cmdlet in Windows PowerShell. Instead, you may be able to use the
Array Configuration Utility to repair a failed virtual disk, depending on the type of failure.
•
If you have created pools using HP SSA, and configured a Storage Pool with mixed drive types
(sizes) and created virtual disks without selecting the Use Maximum Size option, having a small
amount of space left in the smallest physical disk in the Storage Pool, the Server Manager might
display a message informing that a large amount of unused space is available in the pool.
Workarounds
9
... Este manual também é adequado para os modelos :
dados de dispositivos de processamento - HP StoreEasy 3830 Gateway Storage/S-Buy (192.99 kb)
dados de dispositivos de processamento - HP StoreEasy 3840 Gateway Storage (192.99 kb)
dados de dispositivos de processamento - HP StoreEasy 3840 Gateway Storage/S-Buy (192.99 kb)
dados de dispositivos de processamento - HP X3400 G2 Network Storage Gateway (192.99 kb)