Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
Use the iron on an ironing board. Ironing on any other surface may damage that surface. Do not iron or steam clothes that are being worn. Do not use steam in the direction of people or pets. Please Read Before First Use: • During first use of the iron, it may appear to smoke. This will stop and does not indicate a defect or hazard. • Many irons spit or sputter during the first few uses with tap water. This happens as the steam chamber becomes conditioned. This will stop after a few uses. • Steam vents should be cleared before first use. Prepare iron for steam ironing, then iron over an old cloth for a few minutes while letting iron steam. 3 840158400 Ev02.qxd 1/3/07 11:09 AM Page 4 840158400 Ev02.qxd 1/3/07 11:09 AM Page 4 Parts and Features 1. Water Tank Opening 7. Power ON Light and 2. Adjustable Steam Dial Auto Shutoff Light 3. Spray and Blast of Steam 8. Soleplate 4. Auto Shutoff Reset Button 9. Temperature Control Dial 5. Swivel Power Cord 6. Heel Rest How to Dry Iron 1. Turn the Adjustable Steam Dial to . 2. Turn Temperature Control Dial to desired temperature. Allow two minutes for iron to reach desired temperature. 4 How to Steam Iron 1. Unplug iron. Pour 4 ounces ( 1. 2 cup) of ordinary tap water into water tank opening. Plug iron into outlet. 2. Turn Temperature Control Dial to desired setting in the steam range. Allow two minutes for the iron to reach desired temperature. 3. Turn the Adjustable Steam Dial to desired steam setting. Water: Please use ordinary tap water. If you have extremely hard water, alternate between tap water and distilled water for use in the iron. Steam Settings NOTE: The Temperature Control Adjustable Steam Dial Dial steam setting should match the Adjustable Steam Dial setting. For example, if steam ironing wool, the Adjustable Steam Dial should be set to light steam. Temperature Control Dial 5 840158400 Ev02.qxd 1/3/07 11:09 AM Page 6 840158400 Ev02.qxd 1/3/07 11:09 AM Page 6 Features Auto Shutoff Reset Button This light comes on when the iron is first plugged in. After 15 minutes, the iron will shut off and the light will go out. Push the Reset Button to turn the iron back on for another hour of ironing. Power ON Light and Auto Shutoff Light This light comes on when the iron is plugged in and remains on until the iron is unplugged. The light stays on even if Temperature Control Dial is turned to Off. This light also functions as the Auto Shutoff Light. Spray and Blast of Steam Buttons Push Blast Button for an extra blast of steam. Do not press Blast Button more than every 5 seconds. Push Spray Button to release a fine spray of water for difficult wrinkles in cotton or linen. 6 Caring and Cleaning Iron 1. Turn Temperature Control Dial to Off ( O). Unplug and let cool. The iron takes longer to cool down than it does heat up. 2. To empty water from iron, slowly tilt pointed end of iron down over a sink. Water will run out of water tank opening. 3. Wrap cord loosely around iron and store iron in an upright position. Do not store iron laying flat on soleplate. Soleplate 1. Never iron over zippers, pins, metal rivets, or snaps, as these may scratch the soleplate. 2. To clean occasional build-up on the soleplate, wipe with a sudsy cloth. Do not use abrasive cleansers or metal scouring pads. 3. Always store iron upright in the heel rest position. Self-Clean To keep the steam vents clear of any build-up, follow these instructions each time you iron using steam. 1. Turn Temperature Control Dial to OFF ( O ) and set Adjustable Steam Switch to Dry Iron . Fill iron with water to 1.2 of its maximum capacity. 2. Turn Temperature Control Dial to Linen setting and let iron heat for 2 minutes in the heel rest position. Keep Adjustable Steam Switch on Dry Iron . 3. Turn Temperature Control Dial to OFF ( O). Unplug iron and hold over a sink with soleplate facing down. 7 840158400 Ev02.qxd 1/3/07 11:09 AM Page 8 840158400 Ev02.qxd 1/3/07 11:09 AM Page 8 4. Turn Adjustable Steam Switch to Self (dial will rise up), while pressing Blast of Steam button often. water and steam will flow out of steam water to drain from iron. NOTE: Dial may lift all the way out of iron. To replace, align tab on steam dial with slot on hole in iron, push down all the way and twist clockwise. 5. Gently move iron front to back to allow water to clean entire soleplate area. 6. When finished, push Steam Control dial down and turn clockwise to take out of Self Clean mode. This Warranty Supersedes All Other Product Warranties LIMITED WARRANTY This product is warranted to be free from defects in material and workmanship for a period of one (1) year from the date of original purchase, except as noted below. During this period, we will repair or replace this product, at our option, at no cost. THE FOREGOING WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. ANY LIABILITY IS EXPRESSLY LIMITED TO AN AMOUNT EQUAL T...