Assessments - 2, GPA: 5
(
)
)
|
Facilidade de uso
• Always remove the plug from the socket when the appliance is not in use and each time before it is cleaned. • Danger! Nominal voltage is still present in the appliance as long as the appliance is connected to the mains socket. • Switch the appliance off before disconnecting from the mains. • Never use the cord to carry the appliance. 7 8 GB GBGB SPECIAL SAFETY INSTRUCTIONS • Burn hazard! The iron base is escapes while steam • Make sure to unplug • Turn off and unplug the appliance • After using the appliance, in a safe place out of reach of BEFORE FIRST USE • Remove all packaging material and protection • Clean the iron base (8) (see Cleaning and Maintenance). • When first used, a light odour or smoke may this is harmless and of a short duration only. Ensure sufficient ventilation! • Open the lid of the water fill-in opening (3) and fill the water tank (7) with tap water up to the indication mark MAX (5) . The supplied measuring cup (11) can be used for this. If the water is very hard, use distilled water only. Do not use chemically decalcified water! • Close the lid of the water fill-in opening and set the steam selection switch (2) into the position 0. • Connect the power plug (10) with a suitable socket and set the temperature regulator (6) to the highest temperature level MAX. The power indicator (9) will light up. When the power indicator turns off, set the steam selection switch into position . To remove the remaining residue, iron an old piece of cloth. • Turn the steam/spray button (1) into position and blast out steam several times by pressing the steam/spray button. • When all the steam has escaped, the iron is ready to operate. OPERATION Dry Ironing • Fill the water tank as described below in Before First Use. For dry ironing, the water tank does not need to be filled with water. • To dry iron, set the steam selection switch to position 0. • Connect the power plug to a suitable socket and turn the temperature regulator clockwise to the desired temperature. The power indicator will light up. As soon as the desired temperature is reached the power indicator will turn off. If the steam iron has cooled down too much, the power indicator will light up again to indicate that the iron is heating up again. GB GBGB Settings: 0 = OFF • = Nylon, Silk • • = Wool ••• = Cotton MAX = Linen, highest temperature • Before selecting the temperature, the apparel label. • Note: If there are no care instructions, you temperature level. Less steam is produced Caution: Synthetic fibres may melt. • Iron the piece of clothing. • To turn off the appliance, set the temperature regulator selection button to the 0 position. Place the iron in an upright position and unplug the appliance. Steam ironing • Steam ironing can be used in the temperature ranges ••• MAX. Do not use other temperature levels due to the fact that water can from the iron base. • Fill water into the water tank as described below in Before First Use. For reliable functioning of the steam iron, the water tank should be filled with enough water at all times. • Select the desired amount of steam with the steam selection switch. In the position the amount of steam is the highest. Always keep the iron in a horizontal position. • For an extra blast of steam press the steam/spray button in the position. The steaming function should be used at the highest temperature level only. To avoid dripping water from the iron base, wait at least 1 minute between every blast of steam. Spray function: • Turn the steam/spray button into the position and then press the button to moisten the spot to be ironed. Water escapes from the spray nozzle (4) . Vertical steam ironing: • Hold the iron in a vertical position about 15 to 30 cm away from the clothes. To remove wrinkles on hanging apparel, curtains, or any other fabrics, simply press the steam/spray button in the position to blast out steam. • Warning! The steaming temperature is very high. Do not use steam on apparel or fabrics while there are being worn by humans or pets. Turning off the iron: • To turn off the appliance, set the temperature regulator and steaming selection switch to position 0 and unplug the power plug. • Before draining the water, let the appliance cool down completely. Burn hazard! • Open the lid of the water fill-in opening, place the iron upside down, and carefully drain the remaining water while shaking the appliance carefully. • Press the steam/spray button to let the remaining water drain easily. 9 10 GB GBGB CLEANING MAINTENANCE • Be sure to read • To dry the iron, drain to position MAX for a short time while • Turn the iron off as described. • Make sure that the plug is to cool down completely. • Clean the outside of the iron with use a mild detergent. • Do not use abrasive detergents or hard • Wipe the iron base with a damp cloth. • Make sure to clean the water tank, as described from time to time. Fill the water tank with water and then shake Drain the water to remove possible residue. • If the ...
Este manual também é adequado para os modelos :Irons - DB151 (660.29 kb)