Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
Never yank cord to disconnect from outlet; instead, grasp plug and pull to disconnect. 5. Do not allow cord to touch hot surfaces. Let iron cool completely before putting away.. Loop cord loosely around iron when storing.(NI-H10NS/H14NS Only) Wind cord into cord reel unit when storing.(NI-H20NR/H24NR Only) 6. Always disconnect iron from electrical outlet when filling with water or emptying and when not in use. 7. Do not operate iron with a damaged cord or if the iron has been dropped or damaged. To avoid a risk of electric shock, do not disassemble the iron. Take it to a qualified sen/iceman for examination and repair. Incorrect reassembly can cause a risk of electric shock when the iron is used. 8. Close supervision is necessary for any appliance being used by or near children. Do not leave iron unattended while connected or on an ironing board. 9. Burns can occur from touching hot metal parts, hot water,or steam. Use caution when you turn a steam iron upside down - there may be hot water in the reservoir. SPECIAL INSTRUCTIONS 1. To avoid a circuit overload, do not operate another high wattage appliance on the same circuit. 2. If an extension cord is absolutely necessary, a 10 ampere cord should be used. Cords rated for less amperage may overheat. Care should be taken to arrange the cord so that it cannot be pulled or tripped over. SAVE THESE INSTRUCTIONS ©2004 Matsushita Electric industrial Co., LTD. All rights reserved. -2- NOTE: 3 position steam button. С*-*-*- V Dry Low steam High steam Electronic 3-Way AUTO SHUT-OFF FUNCTION (Button UP : for High steam, MED: for Low steam Temperature Zone Steam Button Position a jaor_& Now steam ironing can begin 6. Whenever the iron is set vertically the steaming action will stop. NOTE: Do not use the steam button unless the...
Este manual também é adequado para os modelos :Irons - NIH10NS (1.52 mb)
Irons - NI-H24NR (1.52 mb)
Irons - NI-H20NR (1.52 mb)
Irons - NI-H14NS (1.52 mb)