Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
SAVE THESE INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE ATTENTION • Before using your Digital Velocity iron, remove all paper or plastic bags, plastic sheets, cards and possible stickers that may be on the outside or inside of the appliance that acted as handling protection or sales promotion material. • Read these instructions before first using the iron. • Do not plug it in without checking that the voltage of the iron is the same as your home power. • Take care that the iron cord does not touch the hot parts of the iron. • If you are going to iron with steam, refer to the section “Before Starting To Iron” to extend the life of the independent steam chamber. • To fill the iron or refill it during ironing, follow the instructions set out in the section “Before Starting To Iron,” unplugging it from the main power and using the accompanying water jug. • Do not worry if the iron gives off a little smoke during first use. It will soon disappear. • Do not spray “vertical” steam on a garment hanging in the wardrobe or on a person. Vertical ironing (steaming) must be done with the garment on a hanger and away from people or animals. • Keep the iron in an upright position during storage, leaning on its heel part, set on a stable surface. • When you finish ironing, always empty the water from the tank. If you want to drain it while ironing, always unplug the appliance from the main outlet first. • To disconnect the iron, never pull on the power cord, take out the plug. • If the power cord is damaged; to prevent risks, have it replaced at an After Sale Service authorized by Reliable, as special tools are needed. • The iron should not be used if it has been dropped or has a crack or leak in the water tank. If you observe any of these problems, take the iron to Reliable Corporation or an authorized service depot. • Do not leave the appliance in operation unattended. Keep it out of the reach of children. • This iron is not for use by persons (including children) whose physical, sensorial or mental capacities are impaired, or who lack sufficient experience or knowledge, unless they have been supervised or instructed in the use of the appliance by a person responsible for their safety. IMPORTANT: When you want to dispose of the appliance, NEVER throw it in the garbage. Instead, go to your closest recycling station or waste collection centre for subsequent treatment. In this way, you will be contributing to looking after the environment. MAIN COMPONENTS AND ACCESSORIES (FIG 1) 1. Water filler hole cap 2. Spray outlet 3. Spray button 4. Water tank 5. Removable anti-scale filter 6. Non-slip legs 7. LCD display (Fig 2) a) Temperature change indicator b) Temperature selected c) Steam selected d) Water filling indicator e) Anti-scale filter icon f) Automatic Auto-Pause icon g) Steam On/Off switch h) Power On/Off (hold 2 seconds to turn iron off) & temperature selector button. i) Steam volume selector button & Steam Ready™ feature (hold 5 seconds to activate) 8. Water jug BEFORE STARTING TO IRON • With your Digital Velocity iron unplugged from the main outlet, open the filler hole cap Fig 3 (1) by turning it backwards (see arrow). • Due to the high level of water hardness in most areas, Reliable recommends that you always use distilled or demineralized water for ironing. You will thus guarantee that your iron stays in perfect condition for as long as possible. If you cannot find distilled water for any reason, be sure to use water that is low in minerals (soft). • The following is a list of the best water for your Velocity iron in order of preference: Distilled water ° ° Softened water (from a household water softener) ° Filtered water with low mineral content (counter top unit or store bought) ° Tap water (if your tap water is hard, this is the least recommended). • Fill the tank, without exceeding the maximum level, with the water jug supplied Fig 1 (8), keeping the iron in the vertical position, resting on the non-slip rear cover legs Fig 3 (6). When the tank is full, close the cap. • We advise you to fill the tank up to the maximum level marked on it as this appliance generates a substantial flow of steam, otherwise you will need to fill the water tank more often. • Check whether the garment you are going to iron has a label indicating the ironing temperature. We recommend that you to classify the garments according to their required ironing temperature and to begin with the garments that are ironed with the lowest temperature (•). SILK, SYNTHETIC FIBRES: minimum temperature (•) WOOL: medium temperature (••) COTTON: high temperature (•••) LINEN: high temperature (MAX) ATTENTION: Ironing delicate garments with a temperature higher than necessary is harmful for the fabric and causes burnt residue to get stuck to the soleplate. OPERATION Plug the iron into the main outlet. A buzzer will sound; the display will light up automatically and the thermometer symbol will appear (blinking) alongside the temperature position 1 (•)...