Assessments - 1, GPA: 4
(
)
)
|
Facilidade de uso
(207 ml.) of water. Only water should be used in unit. Other cleaning agents will damage unit and can cause injuries. 15. Always disconnect appliance from electrical outlet when filling with water or emptying, and when not in use. 16. DO NOT operate unit if steam opening is blocked. Should this occur, immediately cease usage and unplug from electrical outlet. 17. Store your SF-435 Compact Fabric Steamer in a cool, dry place. SAVE THESE INSTRUCTIONS! FOR HOUSEHOLD USE ONLY Top Innovations, Inc. COMPACT FABRIC STEAMER PRODUCT INFORMATION COMPACT FABRIC STEAMER PRODUCT INFORMATION The following features and accessories are included with your Steamer. Carefully inspect packaging material as some parts are shipped inside Styrofoam packaging. To obtain possible missing parts, refer to the Customer Support section on page 10 of this manual. UNIT FEATURES & ACCESSORIES 1. Steam Nozzle 2. Water Reservoir Cap 3. Heater Indicator Light 4. Handle 5. Reservoir Level Window 6. Water Reservoir 7. Rubber Accessory Housing 8. Fabric Brush 9. Lint Remover 5 Top Innovations, Inc. COMPACT FABRIC STEAMER PRODUCT INFORMATION COMPACT FABRIC STEAMER PRODUCT INFORMATION • The Steam Nozzle (1) emits a flow of hot, penetrating steam. • The Water Reservoir Cap (2) safely contains steam within the Water Reservoir, and must be removed in order to fill the unit with water. • The Heater Indicator Light (3) illuminates when the unit’s heater is active. • The Handle (4) is designed to stay relatively cool while providing the optimum amount of safety and user comfort. • The Reservoir Level Window (5) lets the user clearly see how much water is in the Water Reservoir. It should not be filled above the MAX (7 oz. / 207 ml.) fill line. • The Water Reservoir (6) is the tank in which water is stored for use by the unit. • The Rubber Accessory Housing (7) is used for connecting the Lint Remover and Fabric Brush to the Steam Nozzle. Connecting the Rubber Accessory Housing along with the Fabric Brush or Lint Remover is required and will reduce excessive water spitting from the Steam Nozzle. • The Fabric Brush (8) fits into the Rubber Accessory Housing and delicately smoothes wrinkles from fabrics. • The Lint Remover (9) fits into the Rubber Accessory Housing, and is useful for removing lint and loose threads from fabrics. Top Innovations, Inc. USING THE COMPACT FABRIC STEAMER USING THE COMPACT FABRIC STEAMER FILLING WATER RESERVOIR WITH WATER 1. Place Compact Fabric Steamer on a flat, level surface. 2. Make sure grounded power cord is unplugged from electrical outlet. 3. If unit has been in use, allow it to cool for at least 5 minutes. WARNING: Always allow unit to cool before adding water. Cold water added to a hot boiler may cause hot water and steam to shoot out of fill hole. 4. Cautiously unscrew and remove Water Reservoir Cap. 5. Carefully fill Water Reservoir with water from a faucet or cup. Pay attention to water level in Water Reservoir using Reservoir Level Window on side of unit, and fill up to the MAX (7 oz. / 207 ml.) fill line. NOTE: To prolong the life of your Compact Fabric Steamer, we recommend using distilled or de-mineralized water. WARNING: Extreme caution should be used when pouring water into the Water Reservoir. Do not look directly down into fill hole when filling. Keep your free hand and any children or pets at a safe distance. NOTE: Do not exceed the MAX fill line. Too much water in the Water Reservoir may cause excess water spitting in steam. 6. Replace Water Reservoir Cap, using care not to over-tighten it. ATTACHING ACCESSORIES 1. Choose either the Lint Remover or Fabric Brush and insert it into Rubber Accessory Housing as shown (FIGURE 1). 2. Slide Rubber Accessory Housing (with inserted accessory) onto Steam Nozzle as shown ( FIGURE 2). Make sure that holes on Steam Nozzle are aligned with open slot on Rubber Accessory Housing so that steam is not blocked. NOTE: The steamer should only be used with these accessories attached to help reduce water spitting. FIGURE 1 FIGURE 2 7 Top Innovations, Inc. USING THE COMPACT FABRIC STEAMER USING THE COMPACT FABRIC STEAMER STEAMING LINENS & FABRICS NOTE: Be sure that Water Reservoir has already been filled before following these steps. Also be sure that Rubber Accessory Housing is connected along with the Fabric Brush or Lint Remover, to reduce excessive water spitting from the Steam Nozzle. 1. Plug grounded power cord into a convenient electrical outlet. Heater Indicator Light will immediately illuminate to indicate that unit is heating up. CAUTION: This unit uses a grounded (3-prong) electrical plug. Use only in properly installed 3-prong electrical outlets. Do not attempt to alter plug or circumvent this safety feature in any way. 2. After approximately 2 minutes of heating time, unit will begin emitting steam. 3. Direct Steam Nozzle (and any attachments) towards material you wish to steam. CAUTION: Always be sure that Steam Nozzle and any other attachments are pointed in a safe...
Este manual também é adequado para os modelos :Irons - SF-435B (193.64 kb)
Irons - SF-435S (193.64 kb)
Irons - SF-435W (193.64 kb)