Assessments - 5, GPA: 4.2
(
)
)
|
Facilidade de uso
How to Use This appliance is for household use only. GETTING STARTED Remove any labels, stickers or tags attached to the body or soleplate of the iron. Note: Use ordinary tap water for ironing. Do not use water processed through a home softening system. TO FILL THE WATER TANK: 1. Open the water-fill cover as shown in (A) . Symbols Dry B C Steam/Blast of Steam Spray 2. Tilt the iron and using a clean measuring cup, pour water into opening until the water reaches the MAX level mark on the water tank (B) . Do not overfill. 3. Close the water-fill cover. 4. Plug in the iron. The power on indicator light comes on (C) . Tip: If unsure of a garment’s fiber, test a small area (on an inside seam or hem) before ironing. 1. Spray nozzle 2. Water-fill cover 3. Dry/steam selector 4. Spray button 5. Surge-of-steam button 6. Power On/Auto Off indicator light 7. Soft touch handle 8. Heel rest 9. Temperature-ready light 10. Fabric-select dial 11. Water tank 12. Self-clean button 13. Soleplate D E FOR STEAM IRONING 1. Move the selector to the desired steam level (D) . 2. Read garment’s label to help you determine fabric type. Turn the fabric-select dial to appropriate setting (between 4 and 6) for your fabric (E) . The temperature ready light glows until it reaches the appropriate temperature. It then cycles on and off during ironing. 3. For optimum performance, let the iron stand for 90 seconds before beginning to iron. 4. When finished ironing, turn the fabric-select dial the selector to and unplug the iron. FOR DRY IRONING 1. Make sure selector is set to . You may want to empty the water (see “Emptying Water Tank After Ironing - . 2. Turn the fabric-select dial to the appropriate garment’s label to help you determine 10-MINUTE AUTO SHUTOFF 1. If you leave the iron on its iron will automatically shutoff indicator light stopped heating (F) . To turn it back on, starts heating again. F 3 4 5 6 2. When finished, unplug the iron and stand it on its heel rest. 3. If using seam, move the selctor to . SURGE OF STEAM • Horizontal 1. With the water tank filled to the MAX mark, set fabric dial to highest temperature setting and let iron stand on its heel rest about 30 seconds. 2. For best performance, use surge of steam at 5-second intervals. • Vertical 1. Be sure the water tank is filled to the MAX mark. Hang the garment to be steamed on a clothes hanger. (Curtains or drapes can be steamed once they are hung.) Set the fabric dial to the highest temperature setting and let iron stand on its heel rest about 30 seconds. 2. Hold the iron close to, but not touching, the fabric. 3. Pull the fabric tight in your free hand and pump the button as you move the iron over the fabric (G). SPRAY You can use spray at any setting. Check that the water tank is filled with water. Press the button. If spray is weak, pump the button a few times. ANTI-DRIP SYSTEM The anti-drip system prevents water spotting at low temperatures. EMPTYING WATER TANK AFTER IRONING - OPTIONAL 1. Turn the...
Este manual também é adequado para os modelos :Irons - AS200 (1.44 mb)
Irons - AS210 (1.44 mb)
Irons - AS225 (1.44 mb)