Assessments - 3, GPA: 4.7
(
)
)
|
Facilidade de uso
. If an extension cord is absolutely necessary, a 15-amperes and 120-volt, or 7-ampere and 220-volt cord should be used. Cords rated for less amperage may overheat. Care should be taken to arrange the cord so that it cannot be pulled or tripped over. SAVE THESE INSTRUCTIONS. Soft-Touch Parts Note: The soft-touch parts of this unit are free of natural rubber and latex. They are safe for individuals allergic or sensitive to these materials. POLARIZED PLUG (120V Models Only) This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way. TAMPER-RESISTANT SCREW Warning : This appliance is equipped with a tamper-resistant screw to prevent removal of the outer cover. To reduce the risk of fire or electric shock, do not attempt to remove the outer cover. There are no user-serviceable parts inside. Repair should be done only by authorized service personnel. Note: If the power supply cord is damaged, it should be replaced personnel or in Latin America by an authorized service 2 3 4 Product may vary slightly from what is illustrated. How to Use This appliance is for houseold use only. Before first use, remove any labels, stickers, or tags that may be attached to the body or soleplate of the iron. 1. Using a clean measuring cup, tilt the iron and pour water into the water-fill opening until the level reaches the MAX mark on the water window (B). Do not overfill. 2. Note: Use ordinary tap water for ironing. Do not use water processed through a home softening system. 3. Plug in the iron. The light on the handle glows and a beep sounds. The digital display illuminates. Temperature setting 1 appears on the display. 4. To select a temperature setting from 1 to 7, press the temperature button located below the digital display until you reach the desired setting (C). The readout will display the setting number and an "up" arrow will flash until the iron has reached the correct temperature for that setting. Note: There is a convenient fabric/temperature guide on the saddle of the iron (D). • For steam ironing, be sure the water reservoir is filled, then turn the variable steam dial to the appropriate setting for the fabric you are ironing (E). For optimum performance at any steam setting, let the iron stand on its heel rest until operating temperature is reached, as indicated on digital display (see fig. A), before beginning to iron. When finished ironing on any steam setting, turn the variable steam dial to "steam off" before unplugging the iron. • For dry ironing, move the variable steam dial to the “steam off” setting. 5. When the correct temperature is reached the iron will beep twice and the arrow will disappear. The temperature setting number will continue to be displayed in the lighted area . 6. To change temperature settings while ironing, just push the temperature button. When a lower setting is selected, a "down" arrow will flash until the iron temperature has lowered to the correct level for that setting. 7. About the Auto Off: When the iron is idle for 10 minutes, the iron will beep one tone, the digital display will flash "Auto Off" and the iron will turn off. B C D E 1. Spray nozzle 2. Water-reservoir opening 3. Digital display window 4. Power/temperature setting button 5. Surge-of-steam button 6. Spray button 7. Power indicator light 8. Heel rest 9. Water window with MAX mark 10. Variable steam dial Note: D2020 electric cord is 2 feet longer. Models D2000 and D2020 1. Digital display window 2. Surge-of-steam button 3. Spray button 4. Power/temperature setting button A D2000.Pub178674RV06 1/17/06 3:29 PM Page 4 D2000.Pub178674RV06 1/17/06 3:29 PM Page 6 "Auto Off" will flash in the unlighted window until the iron is unplugged. When the iron is picked up or moved, it will re-start at same temperature setting. To turn off the iron manually, press the power/temperature setting button for 2 seconds. This can be done from any temperature setting. SURGE OF STEAM • For horizontal surge of steam (F) : Set the fabric dial to the highest temperature setting. Be sure water window is filled to the MAX line. Let the iron stand on its heel rest until operating temperature is reached, as indicated on the digital display (see fig. A) before pressing the surge of steam button ( ). For best performance, use surge of steam at 5 second intervals. • For vertical surge of steam (G) : Be sure water window is filled to the MAX line. Hang the garment to be steamed on a clothes hanger. Curtains or draperies can be steamed once they are hung. Set the fabric dial to the highest temperature setting. Let iron stand on its heel rest until operating temperature is reached, as indicated on the digital display (see fig. A). Hold the iron close to, but no...
Este manual também é adequado para os modelos :Irons - D2000 (321.55 kb)