Log:
Assessments - 0, GPA: 0 ( )

Instruções de Operação Philips, Modelo GC9920/05

Fabricante : Philips
Arquivo Tamanho: 1.18 mb
Arquivo Nome :
Língua de Ensino: en
Ir para baixar



Facilidade de uso


• To avoid shine and seam imprints, use the blowing mode. • To hold the garment flat on the board, use the suction mode. JHIDTMUV Put the mains plug Min an ear thed wall socket. The power-on light goes on. Fill the water tank. Undo the locking strap Jand unfold the ironing board to vertical position. Set both air vent slides Dto the ironing position. Push the board tilting button Hand tilt the board to horizontal position. Set the ironing board to the appropriate height by means of the height adjustment lever I. Take the iron out of the iron compartment, either from the left or right side. Switch the iron on by pressing the iron power-on button U. The power-on light goes on. After approx. 2 minutes the iron is ready for use. If you want to iron with steam, set the temperature dial of the iron to 2or higher and press the steam activator T. Never direct the steam at people. If you want to iron in the blowing mode, press the rounded side of the blowing/suction button. If you want to iron in the suction mode, press the hollow side of the blowing/suction button. You can safely put down the hot iron on the board cover during ironing. You can store the hot iron in the heat-resistant storage compar tment immediately after you have switched the iron off. 1 2 3 5 4 6 7 8 2 Steaming AHanger hook DAir vent slide U Steamer power-on button with light V Blowing/suction button TSteam activator HBoard tilting button IHeight adjustment lever JLocking strap MMains plug ESteaming tips and tricks • The steamer is perfect for all delicate fabrics, such as silk, wool and cashmere. • To steam a jacket, put it directly on the board.To steam a blouse or a dress, use the hanger hook A. MDATHIJUV Put the mains plug Min an ear thed wall socket. The power-on light goes on. Fill the water tank. Undo the locking strap Jand unfold the ironing board to vertical position. Set both air vent slides Dto the ironing position. Take the steamer out of the steamer compartment. Switch the steamer on by pressing the steamer power-on button U. The power-on light goes on. After approx. 2 minutes the steamer is ready for use. Press the steam activator T. Never direct the steam at people. If you want to steam in the blowing mode, press the rounded side of the blowing/suction button. If you want to steam in the suction mode, press the hollow side of the blowing/suction button. You can easily hang the steamer on the board handle Gwhen necessary. You can store the hot steamer in the heat-resistant storage compartment immediately after you have switched the steamer off. 6 4 5 3 2 1 7 Refreshing • jackets, coats and sweaters. • Combine the refreshing mode with the steaming mode to refresh garments and remove creases at the same time. BRefreshing button CAir vent DAir vent slide HBoard tilting button IHeight adjustment lever JLocking strap MMains plug Perfect to remove food or cigarette smoke smells from E Refreshing tips and tricks B C D H I J M Put the mains plug Min an ear thed wall socket. The power-on light goes on. Undo the locking strap Jand unfold the ironing board to vertical position. Set both air vent slides Dthe refreshing position. Press the refreshing button Bon the back of the ironing board. The appliance starts refreshing your garment. This process takes 10 minutes and automatically stops. 1 2 4 Automatic Calc-Cleaning N Q This appliance is equipped with an automatic Calc-Cleaning system. When the power-on light Qblinks, the Calc-Cleaning system is active. Wait 3 minutes for the appliance to complete the Calc-Cleaning process. During this process you cannot use the appliance. When the power-on light Qstops blinking and the rinse tray light starts blinking, empty the rinse tray Nand reinsert it. The Calc-Cleaning process is now finished and you can start using the appliance. 1 5 Storage Fold the ironing board to the storage position and lock the board with the locking strap. To store the cord, briefly pull it towards you and then let it go. The cord will be wound up automatically. You can now easily move the appliance by pulling it along by the board handle. 1 2 3 Frequently asked questions This chapter lists the questions most frequently asked about the appliance. If you can’t find the answer to your question, contact the Customer Care Centre in your country. Question Why doesn’t the appliance work? Why does the iron/steamer remain cold? Why does the iron/steamer switch off? Why does the refreshing mode switch off? Why doesn’t the iron/steamer produce any steam? Why does the appliance produce noise? Why is the airflow insufficient? Why are there water droplets/wet spots on the ironing board? Why do water droplets come out of the iron/steamer? Why does the light on the iron/steamer blink? Why does the water tank light bli...

Este manual também é adequado para os modelos :
Irons - GC9920/27 (1.18 mb)
Irons - GC9920/25 (1.18 mb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias