Assessments - , GPA: ( )

Instruções de Operação Philips, Modelo GC6020/03

Fabricante : Philips
Arquivo Tamanho: 644.76 kb
Arquivo Nome :

Língua de Ensino:

O documento está colocado, por favor, espere

Baixe o seu Fechar

O documento está colocado, por favor, espere

Baixe o seu Fechar

q = moderate steam R = maximum steam G Temperature pilot light H Steam activator button I Temperature control J Supply hose K Soleplate L Mains cord M Anti-calc funnel (type GC6026 only) N Shot of steam (type GC6026 only) For optimal safety, read these instructions carefully and look at the illustrations before you star t using the appliance. -Do not put perfume, vinegar, descaling agents or other chemicals in the water tank. -Never use the appliance if it is damaged in any way. Regularly check if the mains cord and the supply hose are still undamaged and safe. -If the mains cord of this appliance is damaged, it must always be replaced by Philips or a ser vice centre authorised by Philips, as special tools and/or par ts are required. -Do not use any other cap on the steam tank than the cap that has been supplied with the appliance, as this cap also functions as a safety valve. -Check if the voltage indicated on the bottom of the steam tank corresponds to the mains voltage in your home before you connect the appliance. -Only connect the appliance to an ear thed wall socket. -Never immerse the iron or the steam tank in water. -Never leave the iron unattended when it is connected to the mains. -When you have finished ironing and even when you leave the iron for a shor t while, unplug the iron and put it on the iron stand. -Always place the steam tank on a stable, level and horizontal surface. Do not put the steam tank on the soft par t of the ironing board. -Always place the iron on the iron stand. Do not put the hot iron on the supply hose or the mains cord. Make sure the cord does not come into contact with the hot soleplate. -The iron stand and the soleplate of the iron can become extremely hot and may cause burns if touched. If you want to move the steam tank, do not touch the iron stand. -Do not allow the cord to come into contact with the hot soleplate. ENGLISH C -Infirm persons should not be allowed to use the appliance without super vision. Keep an eye on children to make sure that they do not play with the appliance. -If steam escapes from under the steam tank cap when the appliance is heating up, switch the appliance off and contact a ser vice centre authorised by Philips. -Do not remove the cap from the steam tank when the steam tank is under pressure. Follow the instructions under 'Fast refill'. Preparing the appliance for use 1 2 3 4 5 Check if the voltage indicated on the type plate corresponds to the mains voltage in your home. Remove any sticker or protective foil from the soleplate and clean the soleplate with a soft cloth. Fully unwind the mains cord (L) and supply hose (J). Place the steam tank (B) on a stable, level surface. Place the iron on the iron stand (C). Filling the steam tank Make sure the on/off switch (D) has been set to 'off' and remove the plug from the wall socket. Slowly unscrew the cap (A) of the steam tank. Never immerse the steam tank in water. 1 2 You may hear a sound when you remove the cap.This sound is caused by the cold tank being under vacuum. This is perfectly normal. 3 Pour water into the steam tank (max. 1 litre). Use cold tap water to fill the tank up to the maximum level. If the tap water in your area is ver y hard, we advise you to mix tap water with an equal por tion of distilled water, or to use distilled water only. Do not use perfume, vinegar, starch or chemically descaled water. 4 Screw the cap onto the filling aperture of the steam tank. ENGLISH Fast refill C C HILO AIGODON LANAALGODON HILO MAX O/OFFLINEN COTTON WOOL SILK NYLON 1 2 3 4 5 First set the on/off switch (D) to 'off'. Press the steam activator button until you no longer hear any steam escaping from the appliance. Keep the steam activator button pressed in and slowly unscrew the cap of the steam tank by turning it anti-clockwise.This will depressurise the steam tank. Remove the mains plug from the wall socket. Fill the steam tank as described in section 'Filling the steam tank' and let the appliance heat up again. Steam control Temperature dial Type of fabric Label with ironing instructions B Synthetic fabrics, e.g. acetate, acr ylic, viscose, polyamide, polyester, and silk 1 - C Wool 2 q D Cotton, linen 3 R Z Please note: Z in the table means that the ar ticle cannot be ironed. Setting the temperature Always place the steam tank on a stable, level and horizontal surface Do not put the steam tank on the soft par t of he ironing board. Always place the iron on the iron stand. Do not put the hot iron on the supply hose or the mains cord. Make sure the cord does not come into contact with the hot soleplate. 1 Set the temperature dial to the required ironing temperature by turning it to the appropriate temperature indication. -Check the garment label for the required ironing temperature: -1 Synthetic fabrics (e.g. acr ylic, viscose, polyamide, polyester) -1 Silk -2 Wool -3 Cotton, linen ENGLISH C C -When you do not know what kind of fabric the ar ticle is made of, tr y to iron a spot which will be i...