Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
• During first use: Certain components on the appliance have been lightly greased at the factory and may produce a little smoke when initially heated. • During later use: the soleplate may be soiled. • This is completely normal and will stop after a short while. • Clean the soleplate according to the cleaning instructions in this manual. Water flows through the holes on the sole plate. • The steam function is being used before it has reached temperature. • The water is condensing inside the pipes because steam is being used for the first time or has not been used for a long time. • Reduce the steam flow when ironing at low temperatures (Variable steam control (4)). • Point the iron away from the ironing area and press the steam release button (11) until steam is produced. Dirt comes out • There is a build-up of scale or minerals • Use tap water mixed 50% with distilled or through the sole plate. in the steam tank. • Chemical products or additives have been used. demineralised water. If the tap water in your district is very hard, mix tap water with distilled water 1:2. • Clean the sole plate with a damp cloth. • Never add products to the boiler water. The iron does not • The boiler is not switched on or the • Set the main power (6) button to the “I” position produce any steam. water tank is empty. • The water tank is not fitted onto the housing correctly. • The steam regulator is set to the minimum position. and/or fill the water tank. • Fit the water tank back onto the housing correctly (you will hear a click). • Increase the steam flow by turning the steam control (4). The ironed garment turns dark and/or sticks to the soleplate. • The selected temperature is too high and has damaged the garment. • Select a suitable temperature for the material being and clean the sole plate with a damp cloth. The soleplate turns brown. • This is a regular consequence of usage. • Clean the soleplate regularly with a damp cloth. The iron does not stop steaming after placing it on the pad. The appliance makes a pumping sound. • “Intelligent steam” function activated. • Water is being pumped into the steam tank. • The sound will not stop. • Just press the trigger once again and the iron will stop steaming at once. • This is normal. • If the sound will not stop, do not use the steam generator and contact an authorised technical service centre. enen Problem Loss of pressure during ironing. Possible causes Steam release button activated during a long period of time. Solution Use the steam release button (11) with intervals. This improves the ironing result as the textiles will be dried and stay smooth better. Water leakage from the boiler Drainage plug located at the bottom of the appliance is loose. Tighten up boiler drainage plug with a coin If the above does not solve the problem, get in touch with authorized technical service. Advice on disposal Our goods come in optimised packaging. This basically consists in using non-contaminating materials which should be han...
Este manual também é adequado para os modelos :Irons - TS25320/02 (3.61 mb)
Irons - TS25325/01 (3.61 mb)
Irons - TS25325/02 (3.61 mb)
Irons - TS25329/01 (3.61 mb)