Log:
Assessments - 3, GPA: 3.7 ( )

Instruções de Operação Top Innovations, Modelo SF-450

Fabricante : Top Innovations
Arquivo Tamanho: 135.13 kb
Arquivo Nome : c430da82-0685-4ec3-ba08-f74a9493005f.pdf
Língua de Ensino: en
Ir para baixar



Facilidade de uso


Fast Professional Style Steamer Dear Consumer Thank you for purchasing the SteamFast Professional Style steamer. If tap water is being used, in order to prolong the life of your steamer, we recommend that the unit be drained after each use. This will reduce lime buildup within the unit. If used in a hard water area the use of distilled water is encouraged. If you chose to use distilled water it will not be necessary to drain the unit. Your SteamFast steamer is equipped with a thermostat control that will shut the steamer off when the temperature reaches 250°F. The steamer will automatically begin heating again when the temperature drops below 250° F. Should the water tank run dry while the unit is in operation, we recommended that it be turned off immediately. If the steamer is not turned off immediately, the thermostat will cause the unit to shut off, however, damage may occur to the unit. In the event that the steamer is left in operation without water or the thermostat should fail to operate properly, the unit's fuse will burn out at 302° F causing the steamer to shut off. Top Innovations, Inc. 400 NW Platte Valley Dr., Riverside, MO 64150 web site: INTRODUCTION Congratulations! You are about to use the simplest and most Versatile steamer brought to you, SteamFast, a trusted name in clothing care. Your new steamer provides clean, professional results every time! 1. Holds over 1/2 gallon of water -enough for approximately 30 minutes of continuous operation. 2. Water container is removable and easy to fill. 3. Automatic shut-off safety feature. 4. Easy to use drain port. 5. Eliminates ironing by removing wrinkles. 6. Easy roll casters make unit highly portable 7. Convenient hanger for hose. 8. Stores upright minimizing storage space requirements. IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances, always follow basic safety precautions, including the following: 1. Read all instructions. 2. To protect against risk of electrical shock, do not put appliance in water or other liquid. 3. Close supervision is necessary when any appliance is used by or near children. 4. Unplug from electrical outlet when not in use, before putting on or taking off parts and before cleaning. 5. Avoid contact with hot parts. Keep hands, hair, and clothing away from these parts to prevent risk of injury to persons and or burns that could occur. 6. Use this product for its intended use only 7. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or is dropped or damaged in any manner. A damaged cord, plug or unit may result in fire, electrical shock or injury. 8. Do not leave the steamer unattended 9. Please allow the unit to cool before storage 10. Always turn the switch to "off' position before plugging in or unplugging the unit. 11. Do not let cord touch hot surfaces. 12. Do not operate steamer without properly filling the water container. 13. Always keep the hose nozzle elevated above the water container. Do not lay the hose on the floor. 14. This appliance has a grounded plug. The unit must be plugged into a properly grounded three-pronged outlet. 15. Burns can occur by touching hot parts, hot water or steam. SAVE THESE INSTRUCTIONS LEARNING ABOUT YOUR STEAMER Please refer to the picture for each point (1) The control HANDLE on the end of the hose sits just before the nozzle. The HANDLE is designed to be heat free and is safe to grasp. Use the HANDLE to aim the direction of the steam released from the nozzle (2) The NOZZLE on the end of the handle is located on the end of the steamer hose. Always hang the NOZZLE end of the hose on the hanger rod when not in use. Keep the NOZZLE point the NOZZLE downward, water may condense and drip. (3) The ROD is designed to conveniently hang the hose handle and also can support garments for steaming (4) The HOSE extends from the base of the unit Do not pull on the HOSE with undo tension as damage to the hose may result in steam leakage (5) The ON/OFF switch is located on the front of the base. (6) The WATER CONTAINER is filled through the removable water valve on the bottom and should be placed in the reservoir on the base. Avoid spilling excess water into the reservoir as this could cause the steamer to expel water from the nozzle. Do not try to substitute another water container for the one designed for this unit. (7) The WATER LEVEL can be seen visually in the water container. Do not operate the steamer without water in the WATER CONTAINER. (8) The steamer BASE houses the reservoir and water container. It also supports the hanger rod and hose. (9) The CASTERS allow the unit to roll freely (10) The ELECTRICAL CORD plugs into a standard three-prong plug. Use only three prong UL approved extension cords with a minimum 20ampere rating (11) The DRAIN PLUG is located on the side for convenient drainage of the water reservoir. STEAMER ASSEMBLY STEP 1 -ATTACHING THE METAL ROD Set the appliance on a steady surface. The bottom...

Este manual também é adequado para os modelos :
Irons - SF-450 (135.13 kb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias