Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
your new Braun steam iron. Important Safeguards • Read all instructions carefully before entire life of the iron. • Before filling with water, always disconnect • Always pull the plug and not the cord. • Electric irons reach high temperatures during • Keep the iron away from children, and when it is • Disconnect the plug when leaving the room where • Never iron or dampen clothes while wearing them. • During ironing pauses, always place the iron upright in • Never immerse the iron in water or other liquids. • The cord should never come into contact with hot objects or • Check the cord periodically for possible damage. • Do not use a damaged iron. • Take it to a Braun Service Center for repair. • Braun electric appliances meet applicable safety standards. • This appliance can only be opened by an authorised Braun Service Centre • The cord of this appliance may only be replaced by an authorised Braun Service special tools are required. • Faulty, unqualified repair work may cause accidents or injury to the user. • Make sure your voltage corresponds to that printed on the iron. Connect the iron to current (~) outlet only. Table of features for each model Feature: Model: PV 2002 PV 2005 PV 2010 Jet of steam l l l Shot of steam l Extra steam l Spray l l l Specifications Voltage/wattage: See typeplate at the bottom of the unit. Water tank capacity: 215 cc (approximately 1 filling beaker q of water filled up to the mark = 1 tank filling) . Description 1 Temperature selector 2 Water tank with sliding shutter opening 3 Water spray nozzle 4 Steam regulator / self-cleaning activator and anti-calc. valve 5 Extra steam button 6 Jet of steam button 7 1- or 2-function button (water spray/ shot of steam see «Table of features») 8 Pilot light 9 Pivoting cord j Heel rest k Cord storage/typeplate l Transparent water tank L Maximum marking («max.») m Sole plate with 71 steam vents n Full-lenght button groove o Slim pointed tip p Jet of steam outlet q Filling beaker Praktical Guidelines Type of Water to be This iron is designed you have hard water we mixture of 1/2 part tap water water from drug stores or grocery Important: Never use distilled water (battery water). Do not add any additives (e. the water. To fill iron 1. Pull the plug out of the wall outlet. 2. Put the steam regulator 4 in position « • » (= steam off). 3. Open sliding shutter 2 . 4. Place the iron in the upright position and fill with water slowly through the tank opening 2 to the «max.» marking L (a), using the beaker q . 5. Close sliding shutter. Selecting the temperature Connect the iron to a safely located wall outlet and select the ironing temperature with the temperature selector 1 (b). As soon as the pilot light 8 goes out, the iron has reached the temperature selected. To avoid water dripping, always rest the iron upright while heating it up keep the steam regulator 4 in position « • » (= steam off) (c). You will usually find the following symbols in your garments: The temperature selector 1 is marked with these symbols: min. The iron is connected l Synthetics (acrylic, acetate) ll Silk/rayon/nylon/polyester/ cotton blends/wool lll Cotton/linen max. Linen Select the temperature you need according to these symbols. Spray, shot of steam, jet of steam Before you start ironing, we recommend to press the buttons 3 or 4 times, in order to activate these functions. Dry ironing Set the steam regulator 4 in position « • » (= steam off) (c) for dry spray 7 may be used at any temperature setting to dampen the laundry. 6 and the shot of steam 7 buttons can be activated during dry ironing, provided temperature selector 1 is within the continuous red area Steam ironing (see «Table of features») Temperature selection: Set the temperature selector 1 within the red range steam (b) and wait until the iron has reached the selected temperature (i. e. the pilot light 8 goes off). Steam ironing is possible in the entire red range. Steam ironing at lower temperatures may cause water drops instead of steam. Should this happen, turn the steam regulator 4 to the position « • » (= steam off) (c). Steam regulator 4 : Select the quantity of steam required (c) for each garment with the steam regulator 4 . You can increase the quantity by turning the steam regulator clockwise (wide markings) to the end of the red marking. Caution: While ironing do not turn the steam regulator further, otherwise hot water may come out from the sole plate (see section «Decalcifying/Sel...
Este manual também é adequado para os modelos :Irons - PV 2010 (116.19 kb)
Irons - PV 2005 (116.19 kb)