Assessments - 5, GPA: 4
(
)
)
|
Facilidade de uso
• When placing the iron on its heel, ensure that the surface on which the heel is placed is stable. • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Other safetyconsiderations • Use the iron only for its intended use. • Always disconnect the iron from the electrical socket when filling with water or emptying, and when not in use. • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person(s) in order to avoid a hazard. • Do not operate the iron with a damaged cord, or if the iron has been dropped or damaged and if there are visible signs of damage, or if it is leaking. To avoid the risk of electric shock, do not disassemble the iron, but telephone Morphy Richards for advice. Incorrect reassembly can cause a risk of electric shock when the iron is used. Special instructions If your iron does not work, check the following points: • Has the temperature control been set to the required temperature? Is the plug in its socket? Is the plug itself or the socket faulty? (Check by plugging in another appliance). • WARNING: When not in use, your iron shouldnever be placed flat andleft on an ironing board. • To prevent damage to the textile being ironed, follow the temperature guide carefully. (Test the inside of the hem of the garment). 2 UK Helpline 0844 871 0953 Replacement Parts 0844 873 0719 Ireland Helpline 1800 409 119 RN40692MUK Rev3:RN40692 MUK Rev 3 01/12/2009 11:52 Page 3 ELECTRICAL • When ironing is complete, remove the plug from the socket, REQUIREMENTS empty any remaining water from the tank, and allow to cool before storage. • If you drop or severely knock your iron, this could cause internal damage even if the outside appears alright. Have it checked by a qualified electrician. • It is recommended that you use up one beaker of water by operating your iron’s steam and shot of steam functions before ironing any clothes, as some dripping may occur while your iron’s steam system is activated. INSTRUCTIONS FOR USE Check that the voltage on the rating plate of your appliance corresponds with your house electricity supply which must be A.C. (Alternating Current). If the socket outlets in your home are not suitable for the plug supplied with this appliance, the plug should be removed and the appropriate one fitted. WARNING: A damaged orsevered mains cable fitted with a plug should never beconnected to the mains supply. It must be destroyed, as a damaged cable becomeshazardous if connected to a power socket. Should the fuse in the 13 amp plug require changing, a 13 amp BS1362 fuse must be fitted. WARNING: This appliancemust be earthed. Temperature guide Heat setting markings on the adjustable control dial of all Morphy Richards irons match those of the International Textile Care Labelling Code. Symbol (120°C Max) Cool (160°C Max) Warm (210°C Max) Hot Control knob Do not iron positions at all Fabric Nylon, Acetates Wool, Polyester Cotton, Linen e.g. Acrilan mixtures e.g. Rayon, Rayon Courtelle, Orlon Polyester/Cotton mixtures, Triacetates, e.g. e.g. Rayon/Linen Tricel/Polyester Ironing Iron on wrong side Fabrics requiring this if moisture required setting usually require use damp cloth steam pressing for heavy (Not Acetate) cotton, denim etc. Steam/spray/shot of steam Self clean With water in tank Dry and spray Without water in tank Dry ironing 3For details of other Morphy Richards products, please see our website: ‰ ‹ ¤ . › „ A RN40692MUK Rev3:RN40692 MUK Rev 3 01/12/2009 11:52 Page 4 ‹ ¤ . › „ A RN40692MUK Rev3:RN40692 MUK Rev 3 01/12/2009 11:52 Page 4 fi fl ‡ E 400 350 300 COMPONENTS OF YOUR IRON . Shot of steam button ¤ Spray button ‹ Variable steam switch › Filling hole with cap fi Spray nozzle fl Soleplate ‡ Self-clean button · Temperature console ‚ Water tank (illuminated on some models) „ Life long anti-scale lens (certain models only) ‰ Auto shut-off indicator A Temperature selection button E Filling beaker ·‚ BEFORE USE Sort out the items to be ironed according to the type of fabric. This will minimise the frequency of temperature adjustment for different garments. Note: The steam facility should only be used on garments which are suitable for ironing at the 3 dot and MAX setting. Textiles and clothes are supposed to carry ironing instructions. If they don’t, you should follow the fabric guide on page 3, but be sure to test the temperature by ironing the hem of the garment or similar area first. If you adjust the temperature selection button A down from a hot setting to a cooler setting, wait until the iron temperature has stabilised before you continue ironing. Delicate fabrics such as silk, wool, velour, etc, are best ironed with an ironing cloth to prevent shine marks. FILLING A 1 Make sure that the ...