Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
Please review the product warranty and mail the registration form. EURO-PRO LLC: 21 Lawrence Paquette Drive, New York 4400 Bois Franc, St. Tel. : (800) 2- IN-1 Cordless/Corded Iron Model EP484 FOR THE WAY YOU LIVE IMPORTANT SAFEGUARDS When using your iron, basic safety precautions should always be followed, including the following: 1. Read all instructions before using the iron. 2. Use iron only for its intended use. 3. To protect against a risk of electrical shock, do not immerse iron or stand in water or other liquids. 4. The iron thermostat should always be turned to its lowest position before plugging or unplugging from outlet. Never yank cord to disconnect from outlet, instead grasp plug and pull to disconnect. 5. Do not allow cord to touch hot surfaces. Let iron cool completely before putting away. 6. Do not put vinegar or other descaling agents into the water reservoir. 7. Do not use chemically descaledwater. 8. The cordsetshould not be allowed to touch the soleplate when it is hot. 9. Always disconnect iron from electrical outlet when filling iron with water or emptying and when not in use. 10. Do not operate iron with a damaged cord or if the iron has been dropped or damaged. To avoid the risk of electrical shock, do not disassemble the iron. Send it to an authorized EURO-PRO Operating LLCservice center for examination and repair. Incorrect reassembly can cause a risk of electric shock when iron is used. 11. Close supervision is necessary for any appliance used by or near children. Do not leave iron unattended while connected or on an ironing board. 12. Burns can occur from touching hot metal parts, hot water or steam. Use caution when you turn a steam iron upside down as there may be hot water in the reservoir. Never direct steam at any person, especially when using the iron in a vertical position. The steam is very hot and can cause burns. 13. The use of accessory attachments not recommended by EURO-PRO Operating LLCmay result in fire, electrical shock or personal injury. 14. Do not operate in the presence of explosive and/or flammablefumes. 15. Do not use iron outdoors. 16. This product is for household use only. SAVE FOR HOUSEHOLD Rev. 02/02B SPECIAL INSTRUCTIONS 1. To avoid a circuit overload, do not operate another high-wattage appliance on the same circuit. 2. If an extension is absolutely necessary, a 15-ampere rated cord with a polarized plug should be used. Cords rated for less amperage may overheat. Care should be taken to arrange the cord so that it cannot be pulled on or tripped over. SAVE THESE POLARIZED PLUG This appliance has a polarized plug (one blade is wider than theother). As a safety feature, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do no attempt to defeat this safety feature. 2- IN-1 CORDLESS/CORDED IRON 1. Temperature Control Dial9. Stainless Steel Sole Plate2. Variable Steam Control10. Soft Hand Grip 3. Spray Button11. Power Base (unit) 4. Spray Nozzle12. Stand5. Burst of Steam Button13. 3 Position Switch6. Water Filling Inlet Cover13A. Lock Position7. Thermostat Light 13B. Cordless Position8. Water Level Window 13C. Cord Position BEFORE FIRST USE Remove any labels, stickers or tags which may be attached to thebody or soleplate of the iron before using the iron. Read all instructions for use carefully. Always follow the Important Safeguards. IMPORTANT The first time an iron is used, some odor and small white particles may come out of the steam vents. This is perfectly normal and will cease to occur after the iron has been in use for a short while. Before you start using your iron, follow the instructions in the manual and do the following in order to eliminate any odor and small white residue particles and to ensure optimum steam performance. Fill the iron with regular tap water. Set the temperature control dial at its highestand steam control at ‘0’ . When the thermostat light goes off to indicate that the iron hasreached the selected temperature, set the steam control at MAX. Keep the iron in a horizontal position and allow it to steam until the water runs out. Press the steam burst button white residue particles. Repeat this procedure through 2 or 3 fillings of water. CONNECTING THE IRON TO THE POWER SUPPLY • Make sure that the variable steam control dial is set at ‘ 0’. • Place the iron upright on the heel rest or on the stand (12). • Select the required temperature setting on the temperature control dial. • The red thermostat light (7) will come on indicating that the iron is heating up. • When the red light goes out, the set temperature has been reached and the iron is ready to use. • The thermostat light (7) will go on & off as the thermostat is switching the heating element on & off to maintain the selected temperature. CHOOSING THE IRONING TEMPERATURE Set the temperature dial according to the type of fabric . • Synthetics (low...