Assessments - 2, GPA: 5
(
)
)
|
Facilidade de uso
To read more about GE's ecomagination commitment, visit: ge.ecomagination.com Iron-169233-05 (GB).indd 1 1/11/10 9:59 AM IMPORTANT SAfEGUARdS IMPORTANT SAfEGUARdS When using electrical appliances, basic safety precautions should always be followed including the following: rEAd All insTruCTions bEforE usinG • Use the iron only for its intended use. • To protect against risk of electric shock, do not immerse the iron in water other liquids. • The iron should always be turned to Off (o) before plugging or unplugging from outlet. Never yank cord to disconnect from outlet; instead, grasp plug and pull to disconnect. • do not allow cord to touch hot surfaces. Let iron cool completely before putting away. fully retract cord within unit or loop cord loosely around iron, as applicable, when storing. • Always disconnect iron from electrical outlet when filling with water or emptying and when not in use. • do not operate iron with a damaged cord or if the iron has been dropped or damaged. To avoid the risk of electric shock, do not disassemble the iron. Call our toll-free customer assistance number for information on examination and repair. Incorrect reassembly can cause a risk of electric shock when the iron is used. • Close supervision is necessary for any appliance being used by or near children. do not leave iron unattended while connected or on an ironing board. • Burns can occur from touching hot metal parts, hot water, or steam. Use caution when you turn a steam iron upside down – there may be hot water in the reservoir. spECiAl insTruCTions • To avoid a circuit overload, do not operate another high wattage appliance on the same circuit. • If an extension cord is absolutely necessary, a 13 ampere min. HPN-type cord should be used. Cords rated for less amperage may overheat. Care should be taken to arrange the cord so that it cannot be pulled or tripped over. SAvE THESE INSTRUCTIONS! 2 Iron-169233-05 (GB).indd 2 1/11/10 9:59 AM OTHER CONSUMER SAfETY INfORMATION OTHER CONSUMER SAfETY INfORMATION This appliance is for HousEHold usE onlY. WArninG! Shock Hazard: This appliance has a polarized plug (one wide blade) that reduces the risk of electric shock. The plug fits only one way into a polarized outlet. do not defeat the safety purpose of the plug by modifying the plug in any way or using an adaptor. If the plug does not fit, reverse the plug. If it still does not fit, have an electrician replace the outlet. Use the iron on an ironing board. Ironing on any other surface may damage that surface. do not iron or vertical steam clothes that are being worn. do not use vertical steam in the direction of people or pets. 3 Iron-169233-05 (GB).indd 3 1/11/10 9:59 AM PARTS PARTS 5678 9 150cc100cc4 1 2 3 10 15 14 1. Spray nozzle 2. fill inlet cover 3. fill inlet 4. function knob Turn right : steam ironing Turn left : dry ironing Press to open fill inlet cover (2) 5. Spray button 6. Steam burst button 1312 11 7. fabric setting button with display 8. Handle 9. Swivel cord guard 10. Heel 11. Power cord with power plug and tie 12. Water reservoir 13. Color-changing indicator 14. Soleplate with steam nozzles 15. Measuring cup 4 Iron-169233-05 (GB).indd 4 1/11/10 9:59 AM 5 ILLUSTRATIONS a b 150cc 100cc c d ILLUSTRATIONS e f g h i Iron-169233-05 (GB).indd 5 1/11/10 9:59 AM OPERATION OPERATION before first use • Carefully remove the steam iron from packaging. • Remove the cardboard and tissue paper from the soleplate (14). • Clean the outside of the iron with a damp cloth and a mild detergent. • Loosen the tie (11) and completely unwind the power cord (11). • When using the iron for the first time, we recommend testing it on a spare piece of fabric to ensure that the soleplate (14) and water reservoir (12) are completely clean. • The iron may produce an odor and give off smoke when first switched on, as residues from the production process are eliminated. This is normal and does not indicate a defect or hazard. • The iron may spit or sputter during the first few uses with tap water. This happens as the steam chamber becomes conditioned. This will stop after a few uses. Color-changing indicator and buzzer signal • This iron is equipped with a color-changing indicator (13) on both sides of the water reservoir (12) and a buzzer. The fabric setting display (7) shows the setting in corresponding colors ( fabric setting chart). • Press the fabric setting button (7) repeatedly, until the desired setting is displayed ( fabric setting chart). • The fabric setting display (7) and the color-changing indicator (13) flash until the set temperature is reached. • After the set temperature is reached, the fabric setting display (7) and the color- changing indicator (13) stop flashing and light up continuously in the corresponding color. • The buzzer beeps once. • When the iron switches off automatically ( Auto shut-off function), the fabric setting display (7) and color-changing indicator (13) start flashing again. The buzzer beeps six times. 6 Iro...