Any instructions or warranties included in this manual may be subject to change without notice. For the most up-to-date instructions and warranty information, please contact us or visit our website: NOTE: Spare Parts can also be purchased online at under customer service, order spare parts. Please read limited Warranty conditions mentioned in this instruction manual! Please print clearly and fill in details below. Send Warranty Card with product and dated purchase receipt or copy of receipt.

1 Fig. 2 (Top of Water Tank) 7. Vapor Outlet Channel 8. Water Tank Handle (shape of Tank depends on model #) Fig. 2 Fig. 3 (Water Basin) 9. Nebulizer 10. Vaporization Chamber 11. Fan Vent 12. Valve Opener 13. Water Level Sensor Fig. 3 Fig. 4 (Bottom of Water Tank) 14. Water Tank Valve 15. Water Tank Cap 16. Vapor outlet channel Fig. 4 Fig. 5 (Water Tank Lid) 17. Water Tank Lid 18. Vapor Output Slots (shape of Water Tank Lid depends on model #) Fig. 5 TECHNICAL SPECIFICATIONS: Rating Voltage 120V

Shake vigorously again and empty the water. Rinse the Water Tank a few times to get rid of the vinegar smell. 4. Make the same white vinegar water solution and pour into the Water Basin. Let sit for 20 minutes then empty. Rinse with only water a few times to remove any vinegar smell. Wipe dry with a clean soft cloth. 5. Wipe the exterior surfaces of Water Tank and Water Basin with a soft, dry cloth. NEVER IMMERSE WATER BASIN IN WATER. END-OF-SEASON MAINTENANCE 1. Remove the Water Tank from t

Store the humidifier in a cool dry place. 8 Water Level Sensor To clean the water level sensor unscrew or snap off, depending on style, the plastic cap from the pin. Remove the water level sensor float and clean by wiping the parts with a soft damp cloth. Replace the parts by first putting the water float onto the pin and rescrewing the plastic cap onto pin. TROUBLE SHOOTING CAUTION: DO NOT attempt to repair the motor or nebulizer yourself. If the humidifier continues to not operate please

Leave the tank open for some time without the cap, in a cool place. The power light is green but there is no mist being emitted: . . . . . Check that there is water in the tank. Check for possible lime deposits on the water level float or the nebulizer. Make sure that nothing blocks the vapor output slot. Check that the air vent on bottom of humidifier is not blocked. Empty the humidifier and rinse the water basin with cool tap water and allow to dry for 15 to 30 min. White dust appears and sett

DO NOT IMMERSE WATER BASIN IN WATER. 3. Wipe all exteriors surfaces of the base with a soft, dry cloth. Do not immerse the base in water or use water to clean the base. An electric shock may result or the humidifier may be damaged. NOTE: It is recommended to clean humidifier with water and bleach solution as stated above after using the humidifier the fourth time. GENERAL MAINTENANCE AND CLEANING Before any cleaning operation, switch the humidifier off and unplug it. 1. Always unplug the unit be

Add 2 Tablespoons of white vinegar. Shake vigorously and allow to sit for 20 minutes. Shake vigorously again and empty the water. Rinse water tank a few times to get rid of the vinegar smell. 4. Make same white vinegar water solution. Pour into water basin. Let sit for 20 minutes then empty. Rinse with only water a few times to remove any vinegar smell. Wipe with a clean soft cloth. Wipe dry. 5. Wipe the exterior surface water tank and water basin with a soft, dry cloth. NEVER IMMERSE WATER B

Please note that the Indicator Light will stay on. The light indicates that the humidifier has power and is turned on. OPTIONAL HUMIDIFIER FILTER (Filters are not included with the humidifier and can be purchased separately from Crane USA.) A humidifier filter is an optional accessory for your Crane Cool Mist Humidifier. Filters are used to reduce white dust caused by hard water. Soak humidifier filter in water for 30 minutes to activate performance. Place humidifier filter inside Water Basin

Use cool tap water. DO NOT add any medication or other additives to the water. DO NOT pour water into Mist Outlet Channel. 4. Replace the Water Tank Cap by aligning the threads on the Water Tank with the threads on the Cap and turning it clockwise. 5. Turn the Water Tank over and place the full Water Tank on the Central Body, making sure it fits perfectly. Place the Water Tank Cap with Mist Output Slots on top of the Water Tank. Note: Do not attempt to move the humidifier while Water Tank i

CALL US FOR PROBLEMS AND QUESTIONS. WE CAN HELP. If you experience unsatisfactory operation, first refer to the troubleshooting section in manual to ensure that it is not due to care of cleaning. Follow Care and Cleaning Instructions. You can also visit customer service. If you have any questions or comments please call our Crane Service Center 1-888-599-0992 or e-mail Crane Customer Service Center, customer-service@crane-usa.com. Please specify style and model number. Our Customer Service Rep