Assessments - 2, GPA: 3.5
(
)
)
|
Facilidade de uso
20) is touched once the Cooking Zone will start at the low power level (the Cooking Zone Alpha- Numeric display will show "Lo" and the control will beep once). PLEASE NOTE: If the cookware requirements for the Cooking Zone (See pages 6 & 7) are not met the sensors will detect a problem and the display will flash with the power level in the affected Cooking Zone Alpha-Numeric display. Any problems must be corrected before proceeding. NOTE: Touch once, or repeatedly touch the < or > key pads to adjust or scroll through power levels at any time during the cooking process (To scroll through the power levels quickly touch and hold the _ or _ key pads until the power level desired is reached). Once the Cooking Zone power level has been set the food will begin to heat at that level until the power level is manually changed. To Turn OFF the Cooking Zones: ON 1. Once cooking is complete, touch the OFF key pad to turn the Cooking Zone OFF:. 2. The corresponding Cooking Zone ON/OFF LED located ON above the OFF key pad will turn OFF. A beep will sound and the chosen Cooking Zone power level Alpha-Numeric display will turn off. If no other key pads are touched the Cooking Zone will shut OFF. 3. When any Cooking Zone is OFF, the corresponding Cooking Zone Alpha-Numeric display may show HE if the Cooking Zone temperature is HOT. The Alpha-Numeric display will continue to display HE, and even if the Cooktop is switched OFF the Alpha-Numeric display will continue to indicate HE as long as the cooking zone remains HOT. The Cooking Zones may appear to be cool while turned ON and after they have been turned OFF. But the glass surface may be HOT from residual heat transferred from the cookware and burns may occur if surface is touched. Operating the Bridge Cooking Zones The bridge modejoins the two left cooking zones together. To use the bridge cooking zone, both left side cooking zone should be ON off. Press the Bridge OFF key pad (Fig. 24), the bridge indicator light will turn on (Fig. 24). Adjust the power setting by using left front or left rear cooking zone control. ON To exit Bridge mode, press the Bridge OFF key pad, the bridge indicator light will turn off. NaTl': Power Boost is not available when bridge mode is active. important operating notes * Fluids spilled or objects lying on the controls area of the cooktop may cause the cooktop to display an error code and turn OFF while cooking. Clean the spills or remove the objects from the cooktop. o Be sure the cooktop vent holes are NOT blocked. If the vent holes are blocked the cooktop internal sensor may shut OFF the cooktop to avoid overheating the appliance. " If the cookware or pan is moved from the center of any active Cooking Zone for any reason, a sensor will detect the situation and the cookware will no longer heat. The affected Cooking Zone Alpha-Numeric display will flash the power level set for the Cooking Zone. The Cooking Zone will remember the power level setting for up to 3 minutes before the Coo...
Este manual também é adequado para os modelos :Hobs - 790.4392* (2.59 mb)
Hobs - 790.4392* (2.59 mb)
Hobs - 790.4382* (2.59 mb)
Hobs - 790.4382* (2.59 mb)