Assessments - 2, GPA: 5
(
)
)
|
Facilidade de uso
• Keep children away from the appliance when in use. • Never put cooking foil or plastic materials on the ceramic surface when the hob is hot. These materials could melt and cause damage to the hob. • Never use the hob top for storage. • Pan handles should never stand out beyond the edge of the worktop. This will ensure children cannot reach them. • Do not use pans with rough bases (e.g. cast iron) as these may scratch the hob surface. • Do not switch on the zones without cookware in place. • Do not lean over the hob when it is in use. • Follow the cleaning instructions carefully. • Ensure the base of the saucepan is clean and dry before placing it on the hob. • After use, please ensure that all the zones have been switched off. • This hob (Class 3) has been designed for use only as a cooking appliance. Any other use (e.g. heating rooms) should be considered incorrect and therefore dangerous. • The appliance is not intended to be operated by any means of an external timer or separate remote-control system. Important • Do not use the hob if the glass surface is cracked or damaged to prevent risk of electric shock. Disconnect it from the power supply. 2 Using your hob 2 3 7 8 9 1 4 10 5 6 Fig.1 Zones: 1. Front left 0.7/2.1 kW 130/220 mm dual 2. Back left 1.2 kW 160 mm 3. Back right 1.8 kW 190 mm 4. Front right 1.2 kW 160 mm Control panel: 5. Zone indicators 6. Zone displays 7. Zone selection key 8. Power level + key 9. Power level - key 10. Power on/off key Power level Type of cooking 0 switched off 1/2 for melting (butter/chocolate) or keeping food warm 2/3 keeping food hot or to heat small quantities of liquid 3/4 heat larger quantities of liquid (sauces etc.) 4/5 Slow boiling, e.g spaghetti, soups, stews, potatoes 6/7 gentle frying 7/8 browning meats, frying fish, omelettes 9 fast frying steaks Residual Heat Indicators The hob is equipped with residual heat indicators to warn when any of the zones are still hot to the touch after cooking. An H will flash in the relevant zone display after cooking until the zone is at a safe temperature to touch. Please note: You should avoid touching the zones when the hob is in use, or when an H is showing on the zone display. In the event of a power cut, the residual heat indicators will illuminate after the power supply is restored. However, when there is no power supply to the hob the residual heat indicators will not work, so extra care must be taken. 3 Using your hob To switch the zone on • Touch the power key. • Select the zone required by touching the zone selection key until the required zone flashes a 0 in the zone display. The order for zone selection is clockwise starting at the front right zone. The zone display will flash for approximately ten seconds when the zone will be set at the power level selected or switch off if no power level is set. Please note: • To activate a zone, touch the zone selection key until the required zone display flashes. When no display is flashing, the only control key that is active is the power on/off key. To set the power level without Boost function • Touch the – key to set the zone power level at 4, and then increase or reduce the power level using the + and – keys until the required level is set. To set the power level with Boost function The hob is equipped with a Boost function which will set the zone to its maximum power for a specific period of time, and then the zone will return to normal functioning. • Touch the + key to set the zone power level at 9 and then touch - to reduce the power level to the level required. The display will flash alternately an A and the power level. After ten seconds, the zone will be set at the power level selected and the display will show an A. • To check on the power level selected, touch either the + or – key. Please note: • To switch off the boost function, it is necessary to reset the zone by completely switching it off and on again. • As 9 is the maximum power level, there is no boost function available at power level 9. The Extended zone • Once the zone is switched on, touch the + and – keys simultaneously to switch on the extended zone. A • (dot) will show on the zone display to confirm the extended zone is on. The extended zone switches off automatically when the zone is switched off. To switch a zone off • Select the zone required by touching the zone selection key until the required zone flashes a 0 in the zone display. • Touch the + and – keys simultaneously for approximately three seconds. To switch the hob off • Touch the power on/off key for approximately three seconds. Child lock The hob is equipped with a childlock to prevent accidental use. The child lock only operates when the hob is not in use. To set the child lock • Touch the power key. • Then touch the zone selection key and the - key simultaneously. • When the hob beeps, touch the + key. The zone displays will show an L to confirm the child lock is set. To switch off the childlock • Touch the power key. • Then touch the...