Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
6) together showing an Fig. 6 error code. For service call 1-800-4-MY-HOME® (See back cover of this manual). Alpha-Numeric Messages or LED Displayed by Cooking Zone Controls COOKING ZONE ON/OFF PAD -Each of the Cooking Zones have separate ON/OFF key pads. Once the Main Power key pad has been touched to activate the cooktop, touch the Fig. 8 corresponding Cooking Zone ON/OFF key pad once to activate the Cooking Zone needed. "--" will appear in the Alpha-Numeric display. If the corresponding UP/DOWN Arrow key pad is not touched within 10 seconds, the request to turn the Cooking Zone ON will cancel and the Cooktop will go back to ready mode. To set a Cooking Zone power level touch the corresponding Cooking Zone UP or DOWN Arrow key pad once. The Cooking Zone ON/ Fig. 10 OFF LED will glow (Fig. 8). To turn OFF a Cooking Zone, touch the Cooking Zone ON/OFF key pad once. The Cooking Zone LED will turn OFF (Fig. 7). POWER LEVEL SETTINGS -The Cooking Zones have separate Power Level Alpha-Numeric displays. Once active, the Cooking Zones will provide 22 Power Levels to choose from. These include L0(Fig. 11), 2, 3,_, 5, 6, 7, B, 9; as well as precise .2 increment Cooking Zone Power Levels between/._ and 3 (Fig. 9); and half-increment power levels between 3 and "7(Fig. 12). The highest setting • P or "Power Boost" provides 125% power for 10 minutes (See Fig. 10). Each key pad touch (or just holding down the Power Level key pad) will scroll through all the available power levels for any Cooking Zone quickly. RESIDUAL HEAT -Once any Cooking Zone has been used for cooking and turned OFF, and if the cooktop surface temperature on any of the Cooking Zones is still too HOT, HE (See Fig. 13) will appear in the Alpha-Numeric display for the affected Cooking Zone. The HE will continue to display if the tempera ture is still too HOT. The Cooking Zones may appear to be cool while turned ON and after they have been turned OFF. But the glass surface may be HOT from residual heat transferred from the cookware and burns may occur if surface is touched. KEEP WARM -Use the WARM key pad to activate the Warm setting for any of the Cooking Zones. The ON/OFF key pad for the desired Cooking Zone must be activated first, then touch the WARM key pad located in the Cooktop Main Control area once to set. LH (low heat) should appear in the corresponding Cooking Zone Alpha-Numeric display (See Fig. 14). PAN DETECTION -All five Cooking Zones will provide a Pan Detection message. If a Cooking Zone is turned ON and no pan is detected, or the pan has been moved or is not centered correctly, or is not made of magnetic material, power level will flash in the affected Cooking Zone Alpha-Numeric display. Before Using the Cooktop USE THE CORRECT COOKWARE TYPE -The magnetic Cooking Zone sensors located below the cooktop surface require the use of cookware made with magnetic material in order to start the heating process on any of the Cooking Zones. When purchasing pans, look for cookware specifi...
Este manual também é adequado para os modelos :Hobs - 790.4283 (1.83 mb)
Hobs - 790.4292 (1.83 mb)
Hobs - 790.4283 (1.83 mb)
Hobs - 790.4283 (1.83 mb)