Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
Always clean off any liquid as soon as it is spilt: you will Maintenance save yourself any unnecessary effort. Do not leave acidic liquids (e.g. lemon juice, vinegar, etc.) on the hob. Where possible, do not allow salt to come into contact with the surface of the electric hob. The ring cover of the double or triple flame burner and stainless steel parts such as hotplate rings, top sheet and the area around the burners may become discoloured over time. This is normal because of the high temperatures. Each time the appliance is used these parts should be cleaned with a product that is suitable for stainless steel. The stainless steel cleaner must not be used in the area around the controls. The (printed) symbols may be wiped off. Faults Sometimes certain faults detected can be easily resolved. Before calling the Technical Assistance Service, bear in mind the following advice: Fault Possible cause Solution The general electrical system is malfunctioning. Defective fuse. The automatic safety switch or circuit breaker has tripped. Check the fuse in the main fuse box and change it if it is damaged. Check the main control panel to see if the automatic safety switch or circuit breaker has tripped. The automatic on There may be food or The space between the ignition function does not work. cleaning products stuck between the ignition sparkers and the burners. The burners are wet. The burner covers are not correctly positioned. The appliance is not earthed, is not correctly connected or the earth wire is faulty. sparker and the burner must be clean. Dry the burner covers carefully. Check that the covers are correctly positioned. Contact the electrical installer. The burner flame is not uniform. The burner components are not correctly positioned. The grooves on the burner are dirty. Ensure the components are correctly positioned. Clean the grooves on the diffuser. The flow of gas does The gas supply is blocked via Open all intermediary valves. not appear normal or intermediary valves. Change the gas cylinder. no gas comes out. If the gas is supplied from a gas cylinder, check that this is not empty. The kitchen smells of gas. A gas tap has been left on. There may be a leak in the gas cylinder coupling. Turn off the gas taps. Check that the coupling is sound. The safety valves on one of the burners are not working. The control knob was not held down for long enough. The grooves on the diffuser are dirty. Once the burner is lit, hold the control knob down a few seconds longer. Clean the grooves on the diffuser. Technical Assistance Service When contacting our Technical Assistance Service, please provide the product number (E-No.) and production number (FD) of the appliance. This information is given on the specifications plate located on the lower section of the hob and on the label in the user manual. Warranty conditions The applicable warranty conditions are those set out by the company's representative office in the country of purchase. Detailed informatio...
Este manual também é adequado para os modelos :Hobs - EC612PB80E/02 (1.65 mb)
Hobs - EC612PB90Y/01 (1.65 mb)
Hobs - EC612PB90Y/07 (1.65 mb)
Hobs - EC615HB80E/01 (1.65 mb)