Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Hobs - EH875SC11E/20 (363.2 kb)
Hobs - EH875SC11E/20 (414.1 kb)
Facilidade de uso
3. Select the required cooking time in the programming panel. The possible previous setting is, from left to right 1, 2, 3, etc. , up to 10 minutes. Within the next 10 seconds, continue passing through the options in the programming panel until reaching the desired time. The cooking time will be displayed for 10 seconds then begin to count down. Automatic programming If the previous setting from 1 to 5 is pressed in the programming panel, the cooking time is reduced by one minute, if it is held down the time is automatically reduced to one minute. If the previous setting from 6 to 10 is pressed in the programming panel , the cooking time is increased by one minute, if it is held down the time is automatically increased to 99 minutes. Once the time has elapsed The hotplate switches off. The beep sounds and the display comes on ‹‹ for 10 seconds. The x indicator lights up. Pressing the 0 symbol turns off the indicators and stops the beeping. Changing or cancelling the time Press the 0 symbol of the desired hotplate. Change the cooking time in the programming panel, or set to ‹‹ . Note: Any cooking time can be programmed up to 99 minutes. Automatic timer With this function you may select a cooking time for all hotplates. Once a hotplate is switched on, the selected time will begin to count down. The hotplate will automatically switch off when the cooking time has elapsed. Instructions on activating the timer are found in the chapter entitled " Basic settings" . Note: The cooking time of a hotplate may be cancelled or changed: Press the 0 symbol of the desired hotplate. Change the cooking time in the programming panel, or set to ‹‹ . Timer The timer can be set for periods of up to 99 minutes. It is independent of the other settings. The hob must be switched on. The timer can be set for any hotplate not turned on. This function does not automatically switch off a hotplate. How to program 1. Press the symbol 0 for the hotplate, the indicator W is turned on. ‹‹ lights up in the time program function display. 2. Select the desired time in the programming panel. The timer starts to count down after a few seconds. Once the time has elapsed A warning beep sounds. In the time program function display ‹‹ is shown, and the W indicator comes on. After 10 seconds the indicators turn off. Pressing the 0 symbol turns off the indicators and stops the beep. Changing or cancelling the time Press the 0 symbol of the desired hotplate. Change the cooking time in the programming panel, or set to ‹‹ . Note: When the timer is activated, the corresponding hotplate is locked. First turn off the timer and then the hotplate. Automatic time limitation If the hotplate remains in use for a long time and no changes are made in the settings, the automatic time limitation function is triggered. The hotplate stops heating. The ”‰ symbol and the residual heat indicator oe/ • flash alternatively in the display. The indicator goes out when any symbol is pressed. The hotplate can now be reset. When the automatic time function is used, it is governed by the selected power level (from 1 to 10 hours) . Cleaning lock function Cleaning the control panel while the hob is on may change the locked for 35 seconds. The surface of the control panel can settings. now be cleaned without risk of changing the settings. In order to avoid this, the hob has a cleaning lock function. Note: The lock does not affect the main switch. The hob may Press the # symbol. A signal sounds. The control panel is be switched off when desired. Basic settings The device has several basic settings. These settings may be adapted to the user's individual needs. Indicator Function ™ ‚ Childproof lock ‹ Deactivated. * ‚ Activated. ™ . Sound signals ‹ Confirmation beep and error signal deactivated. ‚ Only confirmation beep deactivated. . All signals activated. * ™ † Automatic timer ‹ Switched off. * ‚ - SS Automatic shut-off time ™ ‡ Duration of the time program function warning signal ‚ 10 seconds* . . 30 seconds. „ 1 minute. ™ . Power- Management function ‹ = Deactivated. * ‚ = 1,000 W. minimum power. ‚ = 1,500 W. . = 2,000 W. etc. S or S. = maximum power of the hob. ™ ‹ Return to basic settings ‹ Personal settings.* ‚ Return to factory settings. *Factory settings To access the basic settings The hob must be turned off. 1. Turn on the hob with the main switch. 2. Within the next 10 seconds, press the 0 symbol and hold for 4 seconds. ™‚ yis displayed on the left of the screen and ‹ on the right. 3. Press the 0 symbol several times until the indicator for the 5. Press the 0 symbol again and hold for more than desired function appears on the left of the screen. 4 seconds. 4. Then select the desired setting in the programming panel. The settings will have been correctly saved. Quit To leave the basic settings, turn off the hob at the main switch. Care and cleaning The advice and warnings contained in this section aim to guide you in cleaning and maintaining the hob, so that it is kept in t...
Este manual também é adequado para os modelos :Hobs - EH879SC11/20 (2.15 mb)