Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
It is independent of the other settings. This function does not automatically switch off a hotplate. How to program 1. Press the · symbol several times until the S indicator lights up. ‹‹ is displayed in the time program function display. 2. Press the + or - symbol on the time program function. The basic setting will appear. + symbol: 10 minutes. - symbol: 5 minutes. 3. Set the time required using the + or - symbols. After a few seconds, the timer will start to count down. Once the time has elapsed A warning beep sounds. In the time program function display ‹‹ is shown, and the S indicator comes on. After 10 seconds the indicators turn off. Pressing the · symbol turns off the indicators and stops the beep. Changing or cancelling the time Press the · symbol several times until the S indicator lights up. Change the time with the + or - symbols, or set to ‹‹ . Cleaning protection Cleaning the control panel while the hob is on may change the control panel can now be cleaned without risk of changing the settings. settings. In order to avoid this, the hob has a cleaning protection function. Press the " symbol. An audible signal sounds. The Note: The lock does not affect the main switch. The hob may be switched off when desired. control panel is locked for 35 seconds. The surface of the Automatic time limitation If the hotplate remains in use for a long time and no changes are made in the settings, the automatic time limitation function is triggered. The hotplate stops heating. On the hotplate display, ” and ‰ flash alternately. The indicator goes out when any symbol is pressed. The hotplate can now be reset. When the automatic time function is used, it is governed by the selected power level (from 1 to 10 hours) . Basic settings The device has several basic settings. The settings can be adapted to the user's own needs. Indicator Function ™ ‚ Childproof lock ‹ Off. * ‚ On. ™ . Audible signals ‹ Most signals deactivated. ‚ Some signals deactivated. . All signals activated. * ™ † Automatic timer ‹ Switched off. * ‚ - SS Automatic shut-off time ™ ‡ Duration of the time program function warning signal ‚ 10 seconds* . . 30 seconds. „ 1 minute. ™ . Power- Management function ‹ = Deactivated. * ‚ = 1,000 W. minimum power. ‚ . = 1,500 W. . = 2,000 W. etc. S or S. = hob maximum power. ™ ‹ Return to default settings ‹ Personal settings.* ‚ Return to factory settings. * Factory settings To access the basic settings 4. Then select the required setting using the + and - symbols. The hob must be turned off. 1. Switch on the hob. 2. Within the next 10 seconds, press the‚ symbol and hold for 4 seconds. ™‚ is displayed on the left of the screen and ‹ on the right. 3. Press the ‚ symbol several times until the indicator for the required function appears. 5. Press the ‚ symbol again and hold for more than 4seconds. The settings will have been correctly saved. Quit To leave the basic settings, turn off the hob at the main switch. Care and cleaning The advice and warnings contained in this section aim to guide you in cleaning and maintaining the hob, so that it is kept in the best possible condition Hob Cleaning Clean the hob after each use. This prevents food remains left on the surface from burning. Wait until the hob is cold enough before attempting to clean it. Only use cleaning products specifically designed for glass- ceramic hobs. Follow the instructions provided on the packaging. Do not use: ¦ Abrasive products ¦ heavy-duty cleaners, like oven sprays and stain removers ¦ Pads that may scratch ¦ High-pressure or steam cleaners Glass scraper Remove dried- on food remains using a glass scraper. 1. Release the scraper safety catch 2. Use the blade to clean the hob surface Do not attempt to clean the hob surface with the base of the scraper. This could result in scratching. a= Risk of injury! ! The blade is extremely sharp. Risk of cuts. Protect the blade when not in use. Replace the blade immediately when any imperfections are found. Care of the appliance Apply an additive to protect and preserve the hob. Follow the advice and warnings provided with the product. Hob frame In order to avoid damage to the hob frame, follow the indications below: ¦ Use only slightly soapy hot water ¦ Do not use sharp or abrasive products ¦ Do not use a glass scraper Fixing malfunctions Malfunctions are generally caused by minor faults. Before contacting the Technical Assistance Service, make sure you have read the following recommendations and warnings. Indicator Malfunction Measure none The electric power supply has been Use other electrical appliances to check if there has been a power interrupted. cut. The appliance has not been correctly Make sure that the appliance has been connected correctly. connected following the connection diagram. Electronic system malfunction. If in the above checks, the malfunction is not resolved, contact the Technical Assistance Service. “ flashing The control panel is wet or an object is Dry the control panel area or...
Este manual também é adequado para os modelos :Hobs - T44D30N1/01 (640.43 kb)