Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
IMPORTANT: In the unlikely event that the appliance should arrive damaged or not meet your expectations in terms of quality, please inform us as soon as possible. For the warranty to be valid, the appliance must not have been tampered with, or used inappropriately. Your new appliance The gas burners Operation Fig. 1 There are indications to show which burner each control knob operates. Fig. 1. It is essential to ensure that all the burner parts and the pan supports are correctly installed for the Fig. 4 Switching on manually 1. Press the chosen burner control and turn it anticlockwise to the required setting. 2. Use any type of lighter or flame (cigarette lighter, matches, etc.) and bring it close to the burner. Switching on automatically Safety system Depending on the model, your hob may have a safety system (termopar) that prevents the flow of gas if the burners accidentally switch off. To ensure that this device is active, switch on the burner as usual and, without releasing the control, press and hold it down firmly for 4 seconds after lighting the flame. Ignition sparker Termopar Switching off a burner Turn the corresponding control clockwise to the 0 setting. Power levels The progressive controls can be used to control the power needed, from minimum to maximum power. If your hob features the automatic ON function (ignition sparkers): 1. Press the chosen burner control and turn it anticlockwise to the maximum power setting. While the control is still pressed down, sparks are produced on all burners. The flame ignites (it is no longer necessary to press down the control). 2. Turn the control to the required setting. If it does not come on, turn the control to the off setting and repeat the steps above. This time, press and hold the control for longer (up to 10 seconds). Warning! If after 15 seconds have elapsed, the flame does not ignite, switch off the burner and open a nearby window or door. Wait at least one minute before trying to switch the burner back on. Setting Control off Maximum capacity or aperture and electricity on Large flame Minimum capacity or aperture Economy flame Warnings It is normal to hear a whistling noise while the burner is operating. When it is first used, it is normal for the burner to give off fumes; this does not pose any risk and does not indicate a malfunction; they will disappear in time. Keep the burner as clean as possible. If the ignition sparkers are dirty, they will not light properly. Clean them periodically using a small non-wire brush. Bear in mind that the ignition sparkers must not suffer any serious impacts. An orange-coloured flame is normal. This is caused by the presence of dust in the atmosphere, spilt liquids, etc. For dual double flame burners, the inner and outer flames can be controlled separately. The available power levels are as follows: Inner and outer flame on full power. Outer flame on minimum, inner flame on full power. Inner flame on full power. Inner flame on minimum. Suitable pans T...
Este manual também é adequado para os modelos :Hobs - T69S76N0/05 (2.37 mb)
Hobs - T69S76N0/07 (2.37 mb)
Hobs - T69S86N0/01 (2.37 mb)
Hobs - T69S86N0/02 (2.37 mb)