Fabricante : Bosch Arquivo Tamanho: 558.28 kb Arquivo Nome : Língua de Ensino:

Ir para baixar

Restrictions when using This function is available for all hotplates, provided that the other zone of the same group is not operating (see image). Otherwise, in the visual display of the selected hotplate › and S will flash; then the power level will automatically set itself to S. ............ ............ ........ To activate 1. Select a hotplate. 2. Press the › symbol. The › indicator lights up. The function will have been activated. To deactivate 1. Select the hotplate. 2. Press the › symbol. The › indicator will disappear and the hotplate will return to power level S. The Powerboost function will have been deactivated. Note: In certain circumstances, the Powerboost function may turn off automatically in order to protect the electronic components inside the hob. Time programming function This function may be used in two different ways: ¦ to automatically switch off a hotplate. ¦ as a timer. A hotplate should switch off automatically The hotplate switches off automatically after the time that is set has elapsed. Setting the cooking time The hob must be switched on. 1. Select the hotplate and the required heat setting. 2. Touch the 0 symbol. xlights up in the display for the hotplate. ‹‹ lights up in the timer display. 3. Within the next 10 seconds, set the required cooking time on the settings range. The possible presets from left to right are 1, 2, 3, etc., to 10 minutes. ........ After a few seconds, the cooking time begins to elapse. Note: The same cooking time can be automatically programmed for the all the hotplates. The programmed time passes independently for each of the hotplates. The Basic settings chapter provides information on automatically programming the cooking time. Automatic programming If the previous setting from 1 to 5 is pressed in the programming zone, the cooking time is reduced by one minute. If the previous setting from 6 to 10 is pressed in the programming zone, the cooking time is increased by one minute. Changing or cancelling the time Select the hotplate and then press the 0 symbol. Change the cooking time using the programming zone or set to ‹‹ in order to cancel the time. Once the time has elapsed The hotplate switches off. A warning signal sounds. The time program function lights up ‹‹ for 10 seconds in the display. When the 0 symbol is pressed, the indications turn off and the beeping stops. Notes ¦ If cooking times have been programmed for various hotplates, the time programming function always displays the time for the selected hotplate. ¦ Any cooking time can be programmed for up to 99 minutes. The timer The timer can be set for periods of up to 99 minutes. It is independent of the other settings. This function does not automatically switch off a hotplate. Programming 1. Press the 0 symbol several times until the W indicator lights up. ‹‹ lights up in the time program function display. 2. Select the desired time in the programming panel. The timer starts to count down after a few seconds. Changing or cancelling the time Press the 0 symbol several times until the W indicator lights up. Change the time with the programming zone, or set to ‹‹. Once the time has elapsed A warning signal sounds. In the time program function display ‹‹ is shown, and the W indicator lights up. After 10 seconds the indicators turn off. When the 0 symbol is pressed, the indicators turn off and the beeping stops. Cleaning lock function Cleaning the control panel while the hob is on may change the locked for 35 seconds. The surface of the control panel can settings. now be cleaned without risk of changing the settings. In order to avoid this, the hob has a cleaning lock function. Note: The lock does not affect the main switch. The hob mayPress the #symbol. A signal sounds. The control panel is be switched off when desired. Automatic time limitation If the hotplate remains in use for a long time and no changes The indicator goes out when any symbol is pressed. The are made in the settings, the automatic time limitation function hotplate can now be reset. is triggered. When the automatic time function is used, it is governed by the The hotplate stops heating. The ”, ‰ symbol and the residual selected power level (from 1 to 10 hours). heat indicator oe/• flash alternately in the display. Displaying energy consumption This function displays total energy consumption for the time the The Basic Settings chapter provides information on activating hob has been switched on. this function. After switching off the hob, the consumption in kWh is displayed for 10 seconds. An example is shown in the image with a consumption of ‚.‹‰ kWh. ...... Basic settings The device has several basic settings. These settings may be adapted to the user's individual needs. Indicator Function ™‚ Childproof lock ‹ Deactivated.* ‚ Activated. ™. Audible signals ‹ Confirmation and error signals deactivated. ‚ Only error signal activated. . Only confirmation signal activated. „ All signals activated.* ™„ Display energy consumption ‹ ...

Este manual também é adequado para os modelos :
Hobs - EH845FL67X/01 (558.28 kb)
Hobs - EH875FL17E/01 (558.28 kb)

Baixe o seu

Para fazer o download, introduza 2 dígitos :