Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Select the hotplate and set the heat setting. 2. Touch the 0 symbol twice. ‹‹ y and __ light up in the timer display. 3. Within the next 10 seconds, set the required cooking time in the control panel. ........ The cooking time begins to elapse. Note: The same cooking time can be automatically programmed for the all the hotplates. The programmed time passes independently for each of the hotplates. The Basic settings chapter provides information on automatically programming the cooking time. Changing or cancelling the time Select the hotplate and press the 0 symbol twice. The __ and r displays appear Change the cooking time using symbols 1 to 9 or press 0 to cancel the time. Notes ¦ If a cooking time has been programmed, the display always shows the time of this function. To check the cooking time remaining in a hotplate, select a hotplate and press the 0 symbol twice. ¦ If a time has been programmed for several hotplates, the time of the selected hotplate is always shown. ¦ Any cooking time can be programmed for up to 99 minutes. Once the time has elapsed The hotplate switches off once this time has elapsed. A beep is heard and ‹.‹ appears in the hotplate and the time programming function display shows ‹‹ for 10 seconds. When the 0 symbol is pressed, the displays turn off and the beep goes off. The timer The timer can be set for periods of up to 99 minutes. It is independent of the other settings. This function does not automatically switch off a hotplate. How to program 1. Press the 0 symbol. The indicator U lights up. ‹‹ lights up in the time program function display. 2. Set the required time using symbols 1 to 9. The time starts again after a few seconds. Once the time has elapsed Once the time has elapsed, a beep will sound. ‹‹ and Uare displayed in the time program function display. After pressing the 0 symbol, the indications turn off. Changing or cancelling the time Press the 0 symbol, the U indicator lights up. Change the time using the 1 to 9 symbols or press 0 to cancel. Cleaning lock function Cleaning the control panel while the hob is on may change the locked for 35 seconds. The surface of the control panel can settings. now be cleaned without risk of changing the settings. In order to avoid this, the hob has a cleaning lock function. Note: The lock does not affect the main switch. The hob mayPress the >D symbol. A signal sounds. The control panel is be switched off when desired. Automatic time limitation If the hotplate remains in use for a long time and no changes The indicator goes out when any symbol is pressed. The are made in the settings, the automatic time limitation function hotplate can now be reset. is triggered. When the automatic time function is used, it is governed by the The hotplate stops heating. The ”‰ symbol and the residual selected power level (from 1 to 10 hours). heat indicator oe/• flash alternatively in the display. Basic settings The device has several basic settings. These settings may be adapted to the user's individual needs. Indicator Function ™‚ Childproof lock ‹ Deactivated.* ‚ Activated. ™. Audible signals ‹ Confirmation and error signals deactivated. ‚ Only confirmation signal deactivated. . All signals activated.* ™† Automatic programming of cooking time ‹ Switched off.* ‚-SS Automatic shut-off time. ™‡ Duration of the time program function warning signal ‚ 10 seconds*. . 30 seconds. „ 1 minute. ™. Power-Management function ‹ = Deactivated.* ‚ = 1,000 W. minimum power. ‚= 1,500 W. . = 2,000 W. etc. S or S. = maximum power of the hob. ™S Hotplate time selection ‹ Unlimited: the last hotplate programmed remains selected.* ‚ Limited: The hotplate will only remain selected for 10 seconds. ™‹ Return to basic settings ‹ Personal settings.* ‚ Return to factory settings. *Factory settings Accessing the basic settings 3. Touch the 0 symbol repeatedly until the required function appears in the display. The hob must be switched off. 4. Then select the required setting from the control panel. 1. Switch on the hob using the main switch. 2. Within the next 10 seconds, touch and hold the 0 symbol for 4 seconds. In the display, ™‚ appears on the left and ‹ appears on the right. 5. Touch and hold the 0 symbol for at least 4 seconds. The settings have been saved. Leaving the basic settings Turn off the hob with the main switch. Care and cleaning The advice and warnings contained in this section aim to guide you in cleaning and maintaining the hob, so that it is kept in the best possible condition Hob Cleaning Clean the hob after each use. This prevents food remains left on the surface from burning. Wait until the hob is cool enough before attempting to clean it. Only use cleaning products specifically designed for hobs. Follow the instructions provided on the packaging. Do not use: ¦ Undiluted washing-up liquid ¦ Dishwasher detergent ¦ Abrasive products ¦ Corrosive products such as oven sprays or stain removers ¦ Sponges that may scratch ¦ High-pressure or steam cleaners The bes...
Este manual também é adequado para os modelos :Hobs - PIE775N14E/21 (507.78 kb)