Assessments - 3, GPA: 3.3
(
)
)
|
Facilidade de uso
3.3. Installation Procedure 1. Unpack the Internet Camera package and verify that all the items listed in the Chapter 1 are provided. 2. Connect the Internet Camera to your network by attaching the network cable from the switch/router to the UTP port of the Internet Camera. 3. Connect the power adapter to the Internet Camera and plug the power adapter to power outlet. The Internet Camera will be powered on. When the Internet Camera is ready, the Ready LED will show an orange color. Note: It is highly recommended to use the power adapter shipped with the Internet Camera, do NOT use any other power adapter from any sources. 4. Software Installation .. Follow the simple steps below to run the Install Wizard to guide you quickly through the Installation process. The following installation is implemented in Windows XP. The installation procedures in Windows 98SE/Me/2000/Server 2003 are similar. .. Insert the CD shipped along with the Internet Camera into your CD-ROM drive. The “Autorun.exe” program should be executed automatically. If not, run “Autorun.exe” manually from “Autorun” folder in the CD. .. The Install Wizard will show four selections, select the “IC-1500 / Wg” on left side if you want to install now or click “Exit” to install the program later. The following installation steps are the demonstration of “IC-1500 and IC-1500Wg, now please Click the “Click To Setup Utilities” to continue. .. The system will start the installation procedures. Click “Next” to continue installation. .. If you wish to install the software program in an alternate location, click “Change”; otherwise click “Next” to move on to the next step. .. Click “Install” to start installing the program. .. The system will install the program automatically. .. Click “Finish” to complete the software installation. .. When the installation is completed, the system will auto run ”Administrator Utility“. On the Internet Camera, first page, the cameras found in the network will be listed in the left window. Choose the one you want to configure and click “Setting Wizard” to proceed. .. Please enter the default password “1234” and click “OK” to login to the IP setup page. .. Internet Camera is working through the network (TCP/IP Protocol). The IP address setting must be correct, or you cannot access the camera. The wizard program will detect the IP address status of your network automatically and suggest a free IP address for the Camera. N IC-1500 “N” means the camera is new and not configured. You can accept the suggested value or enter the value manually. If you enter the value manually, please be aware that the “Subnet Mask” must be the same for both the camera and the PC. Click “Finish” to apply the configuration. .. A window will pop up to ask you if you want to run the “Camera Viewer” and see the video of the Camera immediately. Select “OK” to run “Camera Viewer”. .. The “Camera Viewer” will show the video automatically. Congratulations, you can use the camera through the network to view the video from now on. ...
Este manual também é adequado para os modelos :Webcams - IC-1500 (332.82 kb)