Assessments - 5, GPA: 4.2
(
)
)
|
Facilidade de uso
This is especially important for persons over the age of 35 and/or persons with pre-existing health problems. Keys Fitness Products LP assumes no responsibility for personal injury or property damage sustained by or through the use of this product. 2) To reduce the risk of electrical shock, burns, fire or other possible injuries to the user, it is important to review this manual and the following precautions before operation. 2 It is the owner's responsibility to ensure that all users of this exercise bike have read the Owner's Manual and are familiar with warnings and safety precautions. • This exercise bike has a user maximum capacity of 300 pounds. • The CardioMax Exercise bike should only be used on a level surface and is intended for indoor use only. It should not be placed in a garage, patio or near water. Keys recommends an equipment mat be placed under the bicycle to protect the floor or carpet and for easier cleaning. • Wear comfortable, good-quality walking or running shoes and appropriate clothing. Do not use this exercise bike with bare feet, sandals, socks or stockings! • Always examine your exercise bike before using to ensure all parts are in working order. • Do not leave children unsupervised near or on the exercise bicycle. • Never operate the exercise bicycle where oxygen is being administered or where aerosol products are being used. • Never insert any object or body parts into any opening. • Service to your CardioMax exercise bike should only be performed by an authorized service representative, unless authorized and/or instructed by a Keys technician. Failure to follow these instructions will void the warranty. 3 ASSEMBLY PARTS PART PART NO. CONSOLE 5 HANDLEBAR 10 CONSOLE TUBE 2 SEAT 9 SEAT POST 3 FRAME 1 FOOT TUBE 4 ELBOW PADS 24 PEDALS 30, 31 4 4 30 31 1 3 9 2 10 5 24 24 4 5 1 44 50 50 50 444 45 45 45 Foot Tubewith Wheels1 44 50 50 50 444 45 45 45 Foot Tubewith Wheels Assembly of CardioMax 835 Upright Bike Adjusting Seat Height REMOVE ALL SECURITY TAPE AND WRAPPING BEFORE BEGINNING. 1. Attach foot tubes (4) to the frame by using the carriage bolts (44), flat washers (50) and cap nuts (45) provided. Make sure the foot tube with wheels is assembled onto the front of the unit. 2 2. Attach the seat (9) to the seat post (3) with the locknuts (49) and flat washers (50) already provided on the underside seat bolts. 9 50 49 3 6 7 343130214,155049565757343130214,155049565757 3. Attach pedals (30, 31). Axles of pedals are branded "L" and “R.” The pedal marked “R” goes on the right hand side of the bike and the one marked “L” on the left hand side. Tighten the left pedal by turning counter-clockwise and the right pedal by turning clockwise. 8 4. Slide the console tube (2) through the console tube collar (14, 15). Connect the computer cable in the console tube to the computer cable in the main frame. Connect the tension cable in the console tube to the tension cable connection in the main frame. Attach the console tube (2) to the frame with the locknuts (49), flat washers (50) and screws (56) provided. Attach the console tube collar (14, 15) to the main frame (1) with screws (57). 9 55.Connect the computer cable at the top of the console tube (2) 5 59 2 55.Connect the computer cable at the top of the console tube (2) 5 59 2 to the console (5). Both computer cable connections have white ends. Feed the pulse wires from the console (5) down into the console tube (2) and out the front hole in the handle- bar area. Attach the console tube (2) to the console (5) with the screws (59) provided and already attached to the back of the console (5). 10 65 24 24 60 55 10 50 49 60 6. Attach the pulse wires in the handlebar (10) to the wires from the console (5). Connect the handlebar (10) to the console tube with the locknuts (49), flat washers (50) and screws (55) provided. Make sure not to “pinch” any of the pulse wires when connecting the handlebar to the console tube. Attach the elbow pads (24) to the handlebar (10) with screws (60). 11 7878 7. Load your console with the batteries provided. Batteries are 4 8. You have completed the assembly of your new CardioMax bike. “AA” size. 12 13 835 Upright Parts List NO. PART 1 FRAME 2 CONSOLE TUBE 3 SEAT POST 4 FOOT TUBE CONSOLE 6 PULLEY 7 MAG BRAKE 8 TENSION ASSEMBLY 9 SEAT HANDLEBAR 11 BOTTOM LEFT COVER 12 BOTTOM RIGHT COVER 13 TOP COVER 14 CONNECTING LEFT COVER CONNECTING RIGHT COVER 16 LEFT SEAT POST COVER 17 RIGHT SEAT POST COVER 18 PLASTIC COLLAR 19 “V” BELT WHEEL 21 FOOT CAP 22 BALL PLUG 23 SLEEVE 24 ELBOW PAD HAND PULSE 26 PULSE WIRE 27 REED SWITCH WIRE 28 EXTENSION WIRE 29 9mm NUT LEFT PEDAL 31 RIGHT PEDAL 14 QTY 1 1 1 2 1 1 1 2 2 1 2 1 1 5 2 1 1 2 1 2 2 2 2 2 2 2 2 1 2 1 1 NO. PART QTY 32 LEFT CRANK 1 33 RIGHT CRANK 1 34 LOCKING KNOB 1 35 6004 PRECISE BEARING 2 36 608 PRECISE BEARING 1 37 EYEBOLT 2 38 SPRING 1 39 BELT TENSION BRACKET 1 40 ADJUSTMENT CHANNEL 2 41 SENSOR 1 42 IDLER PULLEY 1 43 CRANK CENTRAL CAP 2 44 M8X85mm CARRDIAGE BOLT 4 45 M8 CAP NUT 4 ...