Assessments - , GPA: ( )

Instruções de Operação Chicago Electric, Modelo 67594

Fabricante : Chicago Electric
Arquivo Tamanho: 598.96 kb
Arquivo Nome : 67594.pdf

Língua de Ensino:

O documento está colocado, por favor, espere

Baixe o seu Fechar

O documento está colocado, por favor, espere

Baixe o seu Fechar

Wash hands after handling. (California Health & Safety Code § 25249.5, et seq.) The warnings, precautions, and 6. instructions discussed in this instruction manual cannot cover all conditions and situations that may occur. It must be understood by operator that common sense and caution are factors which cannot be built into this product, but must be supplied by operator. Specifications Electrical Requirements 120 V~ / 60 Hz / 22W Speeds Low/High HOUSEHOLD USE ONLY Unpacking When unpacking, make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at 1-800-444-3353 as soon as possible. Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. Operation Read the entire RULES FOR SAFE OPERATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Figure 1Low OFF HighRocker SwitchBack of Fan 1. Set the Rocker Switch to the Off (O) position. Place the fan on a flat, stable surface, 2. routing the power cord to the nearest outlet, avoiding tripping hazards or strain on the cord. Plug the cord into the outlet.3. Press the Rocker Switch to the desired 4. speed: Low (I)a. High (II)b. When finished using the fan, turn the 5. Rocker Switch to Off (O), unplug the unit and store in a safe, dry location. CAUTION: Should the Fan not start when the unit is plugged in and turned on, or if the motor “hums” but the fan does not rotate, immediately turn off and unplug the fan and have it serviced by a qualified technician. INSPECTION AND MAINTENANCE To prevent serious injury from accidental operation or electric shock: Before appliance inspection or maintenance, make sure the appliance’s switch is turned off, the cord is unplugged, and the unit has cooled completely. To prevent serious injury from Appliance failure: Do not use damaged appliances. If abnormal noise or vibration occurs, have the problem corrected before further use. BEFORE EACH USE,1. inspect the condition of the Fan. Check for loose screws, misalignment or binding of moving parts, the condition of the electric wire and its plug, and any other condition that may affect its safe operation. To facilitate flow of air, clean the fan 2. blade and grills regularly. To do so: Turn off and unplug the fan. Remove a. the five screws from the back of the grill and gently pry the grills apart. Wash the front grill in mild detergent b. and warm water, then wipe dry with a clean cloth. Wipe dirt from the blades, rear grill and c. electrical cord. Re-assemble in reverse order. Allow to d. dry completely before reconnecting to power source. When not in use, store in a safe, dry 3. loca...