Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
Do not use a spray type detergent to clean electrical parts. It may cause electrical shock or damage to the unit. • Do not use solvents such as thinner, benzine or polishing powder for cleaning the painted surfaces, face plates, etc. as these parts may become dull or scratched. Do not wash parts with any type of hard brush as they can cause damage. 6 Disassembling Filter First, remove the knob holding the filter, then slide it in the direction of the arrow to disengage from the catches. NOTE: As the filter may have grease built-up, be careful when removing it. Cleaning Filter After immersing the filter in warm water with a mild detergent for 30 to 40 minutes, wash it with a soft brush or the like to remove dirt. Clean the filter frequently to avoid grease build-up, which is difficult to clean. Front Cover • After wiping the front cover off with a cloth immersed in a mild detergent, wipe off moisture thoroughly with a dry cloth. • Do not accessably rub the front cover as it may cause damage to coating. Ä mild detergent Re-assembling_ Re-assembly will be done by following the disassembly procedure in reverse order described in Item “disassembling”. (1) Make sure that the filter is fixed in the appropriate position firmly. (2) Make sure that there is no abnormal vibration sound when running. 7 the light bulb_ Three 50Watt halogen light bulbs can be installed in this range hood. The light bulbs to purchase are halogen (PAR20 bulb, with base diameter 26mm: medium base), rated at 120V - 50Watt or below. Re The following light bulbs are recommended for this range hood. • GE Model No. 50PAR20H/FL25 • SYLVANIA Model No. 50PAR20/HAL/DL/NFL To remove the light bulb, turn it counter clock-wise. Replace the light bulb by turning it clock-wise. NOTE: When replacing the bulb, wait until it has cooled off before removing, or injury may result. 8 Requesting service Prior to requesting service Prior to requesting service, do the following check by yourself for common errors. Situation Check Range Hood does not operate Is power switch on at the service breaker? Range Hood is noisier than usual or vibrating Is the filter contaminated by grease? Is the filter installed properly and tightly? Lamp does not turn on Is the bulb broken? Is the correct P/N bulb installed? Is the bulb installed the socket correctly? NOTE • Service parts are kept at the manufacturer for a maximum of six years after ceasing the production of this model. • Requesting service can be done by contacting the dealer who sold the range hood. • When the range hood is not working normally even after checking common errors, please provide the following information to Fuji Industrial USA, Inc. (FIU). Fuji Industrial USA, Inc. After Service Division 16300 Christensen Rd, Ste 212 Seattle WA 98188-3403 Telephone: 1-888-647-9880 Telephone: 1-866-FUJI IND (1-866-386-4463) a. Product..........................Range Hood b. Model Number.................BUF-08W/BUF-08P c. Serial Number d. Date of purchase e. What is the problem? f. Owner's address g. Owner's telephone number h. Suggested date for service person's visit Inspection label The model number and serial number are indicated on the inspection label, which is attached to the inside of the Range Hood. Remove the filter to see it. Inspection label 9 Specifications Refer to the following table. Model Voltage (V) Frequency (Hz) Speed Power Consumption (W) Air Flow (CFM) Noise Level (dB) Weight (lbs) at 0 Pa at 25 Pa Hi 700 1320 1280 56 BUF-08W 120 60 Me 510 850 800 45 68.2 Lo 420 450 410 31 Hi 700 1250 1210 58 BUF-08P 120 60 Me 500 830 790 47 70.4 Lo 420 450 390 32 NOTE FUJI INDUSTRIAL CO., LTD. has measured airflow under HVI-916 and noise levels under Japanese Industrial Standard (JIS) C9603 items 8.8 and 8.9. rcuit diagram Lamp Switch Fan Switch Capacitor Pilot Lamp 10 pjrts list No. Parts Name 1 Enclosure 2 Exhaust Pipe Unit 3 Front Cover (Clear Coated Stainless) 4 Switch Box Unit 5 Wire Box Unit 6 Earth Wire Unit 7 Fan Unit Case 8 Motor 9 Sirocco Fan 10 Bellmouth 11 Filter 12 Attachment f > Attachment BUF-08W BUF-08P Name of parts Figure Figure Screw M5 x 30 Four(4) Pieces Four(4) Pieces Nut with plate M5 Four(4) Pieces Four(4) Pieces Screw M4.5 x 45 Four(4) Pieces — Mounting Bracket V- - One (1) Piece ^ 11 Limited product warranty_ I The Fujioh product warranty is to the original purchaser (consumer) of its products only and is | not transferable. Fujioh warrants that its products will be free from defects in materials or workmanship for a period of three years from the date of original purchase. THERE ARE NO H OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, | IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. During this three year warranty period, Fujioh will, at its option, repair or replace, free of charge, any product or part that is...
Este manual também é adequado para os modelos :Fans - BUF-08P (772.39 kb)