Assessments - 3, GPA: 4.7 ( )

Fabricante : Hotpoint Arquivo Tamanho: 894.43 kb Arquivo Nome : Língua de Ensino:

By making sure that this appliance is disposed of in a suitable manner, the user is helping to prevent potential damage to the environment or to public health. The symbol on the product or on the accompanying paperwork indicates that the appliance should not be treated as domestic waste, but should be delivered to a suitable electric and electronic appliance recycling collection point. Follow local guidelines when disposing of waste. For more information on the treatment, re-use and recycling of this product, please contact your local authority, domestic waste collection service or the shop where the appliance was purchased. Installation instructions Assembly and electrical connections must be carried out by specialised personnel. • Electric Connection The appliance has been manufactured as a class II, therefore no earth cable is necessary. The connection to the mains is carried out as follows: BROWN = L line BLUE = N neutral If not provided, connect a plug for the electrical load indicated on the description label. Where a plug is provided, the cooker hood must be installed in order that the plug is easily accessible. An omnipolar switch with a minimum opening of 3mm between contacts, in line with the electrical load and local standards, must be placed between the appliance and the network in the case of direct connection to the electrical network. • The minimum distance between the support surfaces of the cooking pots on the cooker top and the lowest part of the cooker hood must be at least 65 cm. If a connection tube composed of two parts is used, the upper part must be placed outside the lower part. Do not connect the cooker hood exhaust to the same conductor used to circulate hot air or for evacuating fumes from other appliances generated by other than an electrical source. Before proceeding with the assembly operations, remove the anti8 Use and maintenance grease fi lter(s) (Fig.8) so that the unit is easier to handle. In the case of assembly of the appliance in the suction version prepare the hole for evacuation of the air. • We recommend the use of an air exhaust pipe with a diameter of 150. If a pipe with a smaller diameter is used, the efficiency of the product may be reduced and its operation may become noisier Please note: If your version of the appliance has decorative glass before installing the hood, carry out the following steps as shown in fi gure 4: 1 - Remove both the cooker hood body B and the glass panel A from the packaging and place them horizontally on a secure surface. 2 -Take the glass panel A and position it above the cooker hood body B. 3 - Fix the glass panel securely to the cooker hood body using the 4 sleeves C and 4 screws D as indicated. • Fixing to the wall Drill the holes A1 respecting the distances indicated (Fig.2). Fix the appliance to the wall and align it in horizontal position to the wall units. When the appliance has been adjusted, definitely fix the hood using the screws A2 (Fig.5). For the various insta...

Baixe o seu

Para fazer o download, introduza 2 dígitos :