Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
Auto Off Touch ‘auto off’ button to turn the timer ON and depress ‘auto off’ button again to cancel the timer function. caution • Before maintenance or cleaning is carried out, the canopy rangehood should be disconnected from the main power supply. Ensure that the rangehood is switched off at the wall socket and the plug removed. • External surfaces are susceptible to scratches and abrasions, so please follow the cleaning instructions to ensure the best possible result is achieved without damage. Stainless steel surface Clean stainless steel surfaces using non-abrasive cleaning products that are specifically for use on stainless steel. To ensure best results also use an even pressure and follow the grain of the stainless steel. Use of a soft cloth reduces the risk of scratching. If the cloth is wet ensure that a dry soft cloth is used to wipe down the surface again reducing the risk of any surface rust appearing. Control panel surface The inlay control panel can be cleaned using warm soapy water. Ensure the cloth is well wrung before cleaning. Use a dry soft cloth to remove any excess moisture left after cleaning. Grease filters The mesh filters can be cleaned either by hand or in the dishwasher. After cleaning ensure that the filters are completely dry before refitting. By hand: Soak in warm water and some washing up liquid. For stubborn grease stains use a soft nylon brush to help remove these stains. In a dishwasher: Ensure that placement of the filters is made so as to not impede the function of the spray arm. Washing the filters in a dishwasher may cause discolouration of the aluminium inner mesh over time although it will not affect their performance. Filters should be washed separately to crockery and kitchen utensils. Glass fascia The glass fascia on model ERCG9030AS can be cleaned with window cleaner or a mild detergent and hot water and paper towelling. Using a small flat blade screwdriver remove the inner stainless steel ring to obtain access to the halogen globe. When removing the inner ring, do so carefully, as the glass lens could easily fall out of the inner ring. Remove halogen globe, whilst cool, and replace carefully with a new globe. The rangehood takes 2 x 20W, 12 volt halogen globes. important When handling globes hold with a cloth or gloves to ensure perspiration does not come in contact with the globe as this can reduce the life of the globe. electrolux e:line rangehoods using the rangehood 7 Using the rangehood – ERCG9030AS Using the rangehood – ERCE9020AS low mediumhighlightauto offOFFboost low lockmediumhighlightauto offOFFboost1 min. electrolux e:line rangehoods maintenance / halogen lamps 8 Changing the halogen lamps Maintenance and cleaning electrolux e:line rangehoods optional ducting accessories 9 Optional ducting accessories AR150RCAR150FAR600FS* AR600FSG† AR600CF* AR600CFG† Replacement FilterAR600RK* AR600RKG† AR150WV ERCM9010AS* ERCE9020AS* ERCG9030AS† NOTE: Accessories are to be purchased separately. Part Number...
Este manual também é adequado para os modelos :Fans - ERCE9020AS (2.69 mb)
Fans - ERCE9020AS (2.69 mb)
Fans - ERCE9020AS (2.69 mb)
Fans - ERCG9030AS (2.69 mb)