Assessments - 2, GPA: 4.5 ( )

Fabricante : Broan Arquivo Tamanho: 516.87 kb Arquivo Nome : Língua de Ensino:

• WARNING - Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric shock. 32 Description of the Appliance • The hood is supplied as an extractor unit and To the outside can also be used with a filtering function by fitting one charcoal filter. • You will need an original Electrolux charcoal filter for this function (Available from your local Electrolux Service Force Centre). Fig. 1 - Extractor version HoseCoupling ring (Bayonet and screw fitting) ONLY for: EFT 630 W/GB / 942 120 776 EFT 630 B/GB / 942 120 777 EFT 635 X/GB / 942 120 779 • The cooker hood is supplied ready for use as a recirculation hood and may be used for extraction by removing the charcoal filter which has been fitted inside the cooker hood. Extractor version • In this version fumes are extracted to the outside via a hose connected to the coupling ring. Attention: The hose is not supplied and must be purchased separately. • In order to obtain the best performance the hose should have a diameter equal to the outlet hole. Recirculation Version • The air is filtered through a charcoal filter and returned to the kitchen through the front grid. • Move the lever to position F. • You will need an original Electrolux charcoal filter for this function (Available from your local Electrolux Service Force Centre). Fig. 2 - Recirculation version Charcoal Filter Lever Front grid 33 Control Panel • Best results are obtained by using a low speed for normal conditions and a high speed when odours are more concentrated. Turn the hood on a few minutes before you start cooking, you will then get an under pressure in the kitchen. The hood should be left on after cooking for about 15 minutes or until all the odours have disappeared. The control switches are located on the unit’s front panel: • the light switch switches the hood lamp on and off • the motor switch switches the motor on and off, enabling you to select one of the three different speeds. Correct ventilation If the cooker hood is to work correctly there must be an under pressure in the kitchen. It is important to keep the kitchen windows closed and have a window in an adjacent room open. Light switch Motor switch Fig. 3 - Control panel 34 35 Warning • Failure to observe the instructions on cleaning the unit and changing the filters will cause a fire hazard. You are therefore strongly recommended to follow these instructions. • The manufacturer declines all responsibility for any damage to the motor or any fire damage linked to inappropriate maintenance or failure to observe the above safety recommendations. Cleaning the hood • Clean the outside of the hood using a damp cloth and a mild detergent. • Never use corrosive, abrasive or flammable cleaning products. • Never insert pointed objects in the motor’s protective grid. • Wash the outside surfaces using a delicate detergent solution. Never use caustic detergents or abrasive brushes or powders. • Only ever clean the switch panel and filter grille using a damp cloth and delicate detergents. • It is extremely important to clean the unit and change the filters at the recommended intervals. Failure to do so will cause grease deposits to build up that could constitute a fire hazard. Metal grease filter (EFT 635-535) • The purpose of the grease filters is to absorb grease particles which form during cooking and it must always be used, either in the external extraction or internal recycling function. Attention: the metal grease filters must be removed and washed, either by hand or in the dishwasher, every four weeks. Removing the metal grease filter First pull the latches backwards (a), then extract the grille outwards (b). Hand washing Soak grease filters for about one hour in hot water with a little washing-up liquid added, then rinse off thoroughly with hot water. Repeat the process if necessary. Refit the grease filters when they are dry. Dishwasher Place grease filters in the dishwasher. Select most powerful washing programme and highest temperature, at least 65°C. Repeat the process. Refit the grease filters when they are dry. When washing the metal grease filter in the dishwasher a slight discolouration of the filter can occur, this does not have any impact on its performance. • Clean the inner housing using a hot detergent solution only (never use caustic detergents, abrasive powders or brushes). • The hood must always be disconnected from the electricity supply before beginning any maintenance work. Maintenance and Care Fig. 4 -Removing the metal grease filter Latch - EFT 635 - EFT 535 Latch - EFT 630 - EFT 530 Fig. 5 - Paper Grease filter Grease filter Stops Latch Latch Grid 36 Paper grease filter (EFT 630-530) • The purpose of the grease filters is to absorb grease particles which form during cooking and it must always be used, either in the external evacuation or internal recycling function. The paper grease filter is very thin (approx. 1 mm) and positioned on the inside of its related ...

Baixe o seu

Para fazer o download, introduza 2 dígitos :