Assessments - 4, GPA: 3.5
(
)
)
|
Facilidade de uso
This appliance must be used with a Wolf approved remote mounted control module and top cover, which is included with the downdraft. Installation of the control module must be within 10' (3 m) of the downdraft assembly and a minimum of 4" (102) from the outer edge of cooktop element or burner. You will be required to drill three holes and connect the two units by the provided wire. Refer to the installation instructions shipped with each Wolf product for detailed specifications. Dimensions in parentheses are in millimeters unless otherwise specified. Planning Information Planning Information Models DD45I and DD45R Downdraft Systems DUCTING CONSIDERATIONS Except for Models DD30I, DD36I and DD45I, which include a 500 CFM internal blower, Wolf downdrafts are shipped without the blower assembly. In-line and remote blower assemblies are available through your Wolf dealer. To obtain local dealer information, visit the Locator section of our website, wolfappliance.com. IMPORTANT NOTE: Install this downdraft ventilation system only with a Wolf blower. Wolf downdraft systems have an adjustable discharge that will allow you to negotiate ducting around floor joists and other obstacles. Three different discharge locations are available with side to side adjustment for accurate alignment of ductwork. Refer to the illustration below for discharge location options. Discharge location options for internal and remote blower models. DISCHARGE CUTOUT DIMENSIONS: 101/4" (260) x 31/2" (89) INTERNAL BLOWER 141/4" (362) x 31/2" (89) REMOTE BLOWER CENTERLINE OF COUNTERTOP CUTOUT 163/8" (416) INTERNAL BLOWER 211/2" (546) REMOTE BLOWER 51/2" (140) INTERNAL BLOWER 41/4" (108) REMOTE BLOWER CL 221/8" (562) INTERNAL BLOWER 19" (483) REMOTE BLOWER RIGHT DISCHARGE LOCATION LEFT DISCHARGE LOCATION CENTERLINE OF COUNTERTOP CUTOUT 51/2" (140) INTERNAL BLOWER 41/4" (108) REMOTE BLOWER CL NOTE: Measurements are to centerline of duct cutouts ADJUSTMENT: 5" MAX (127) REMOTE BLOWER ADJUSTMENT: 1" (25) - 7" (178) INTERNAL BLOWER 21/2" MAX (165) REMOTE BLOWER BOTTOM DISCHARGE LOCATION Dimensions in parentheses are in millimeters unless otherwise specified. 6 Planning Information Planning Information Models DD45I and DD45R Downdraft Systems DUCTING CONSIDERATIONS For best performance, 10" (254) round ductwork is recommended. The downdraft will operate most efficiently when ductwork does not exceed 40' (12 m) in length. Consult a qualified HVAC engineer for specific ducting applications. IMPORTANT NOTE: All Wolf downdrafts must be vented to the outside. Use only metal ductwork. Choose the ducting option that allows the shortest length of ductwork and a minimum number of elbows and transitions. Refer to the illustration below for ducting options. Refer to the cooktop ventilation charts at the end of this section for recommendations and blower options. Ducting options for downdraft Models DD45I and DD45R. 12" MIN TO GROUND WALL CAP INTERNAL BLOWER INSTALLATION THROUGH WALL REMOTE BLOWER ROOF MOUNT INSTALLATION 12" MIN TO GROUND INTERNAL BLOWER INSTALLATION THROUGH WALL 12" MIN TO GROUND 10" ROUND REMOTE BLOWER INSTALLATION THROUGH WALL REMOTE BLOWER REMOTE BLOWER 10" ROUND Dimensions in parentheses are in millimeters unless otherwise specified. 7 Planning Information Planning Information Wolf Ventilation Recommendations WOLF BLOWER ASSEMBLIES A ventilation system must include a blower assembly. With a few exceptions where internal blowers are included, Wolf ventilation hoods and downdrafts are shipped without the blower assembly. An internal, in-line or remote blower assembly must be selected to accommodate the cooking appliance, CFM requirements and homeowner preferences. Internal, in-line and remote blower assemblies are available as sales accessories through your Wolf dealer. Wolf internal, in-line and remote blowers are for use with Wolf cooktop hoods, downdraft systems and Pro ventilation hoods and hood liners. 113/4" (298) 211/2" (546) 243/8" (619) 181/2" (470) 121/4" (311) 41/2" (114) 18" (457) 22" 247/8" (632) 12" (305) 18" 8" (203) IMPORTANT NOTE: Use only a Wolf blower with all Wolf ventilation products. Internal blowers are mounted inside the hood canopy or downdraft blower box. In-line blowers are mounted in between the hood and the exterior of the home. Remote blowers can be mounted on the roof or in some cases, on an exterior wall. Refer to the illustrations below for dimensions of Wolf in-line and remote blowers. Ventilation recommendation charts on the following pages provide minimum CFM recommendations according to the cooking appliance and ventilation system used and blower options for each specific ventilation hood or downdraft. (559) (457) In-lineBLOWER-60IL In-lineBLOWER-110IL 241/2" (622) 151/2" (394) 281/4" (718) 203/4" (527) 243/4" (629) 14" (356) 43/4" (121) 10" (254) Diameter 143/4" (375) 291/2" (749) 291/2" (749) 18" (457) 22" (559) 101/8" (257) 71/4" (184) 10" (254) 10" (254) Diameter 143/4" (375) 291/2" (749) 291/2" (749) 2...
Este manual também é adequado para os modelos :Fans - DD45I (256.2 kb)