Assessments - 1, GPA: 3
(
)
)
|
Facilidade de uso
Guide to the hood 8 Guide to the hood a Joystick The fan and light can be operated with the joystick. b Overhead lighting c Grease filter d Charcoal filters additional accessory DA 362-75 two filters DA 362-110 four filters e Main power switch only for the DA 362-110 f Fan power scale g Delay Shut Down This button activates the Delayed Shut Down feature. The fan can be set to turn off automatically after either 5 or 15 minutes. h Grease filter button The indicator above the grease filter button lights when the grease filters need to be cleaned. The button is also used: – to reset the grease filter timer after cleaning the grease filters (see "Cleaning and Care"). – to show how long the grease filters have been in use (see "Operation / Filter timers"). – to change the number of hours counted by the grease filter timer (see "Operation / Reprogramming the filter timers"). i Charcoal filter button The indicator above the charcoal filter button lights up when the charcoal filters need to be replaced. The button is also used: – to reset the charcoal filter timer after changing the filters (see "Cleaning and Care"). – to show how long the charcoal filters have been in use (see "Operation / Filter timers"). – to change the number of hours counted by the charcoal filter timer (see "Operation / Reprogramming the filter timers"). Operation Main power switch Joystick only for the DA 362-110 Press the main power switch to "l" to use the fan and lighting. If the appliance is not going to be used for a long period of time (e.g. while vacationing) it should be turned off ("0") at the main power switch. The next time it is turned on, the hood will operate at the level previously used. The joystick controls the fan power and overhead lighting. Operation Turning on the fan ^ Press the joystick once to the right. The fan runs at power level “lI” and the second indicator of the fan power scale lights. Selecting the power level ^ Press the joystick to the right, to increase the fan speed. The corresponding indicator of the fan power scale lights. Level "1" to "3" (green indicators) are usually sufficient for normal cooking. Intensive setting Level "4" (yellow indicator) should be used for a short period when frying or cooking food with a strong aroma. Fan performance DA 362-75: The maximum air flow capacity is 425 cfm. Factors such as narrow duct diameter and bends will affect this value. DA 362-110: The maximum air flow capacity is 850 cfm. Factors such as narrow duct diameter and bends will affect this value. Level 1 operates at 40% capacity Level 2 operates at 60% capacity Level 3 operates at 80% capacity Level 4 operates at 100% capacity There will also be a slight decrease in airflow for hoods operated in recirculation mode due to the active charcoal filter. Operation Delayed Shut Down If odors or smoke remain in the kitchen after cooking has been completed, the Delayed Shut Down feature can be selected to allow the hood to continue running for either 5 or 15 minutes. ^ Press the Delayed Shut Down button while the fan is still running: Press once = 5 minutes delay (left indicator lights) Press twice = 15 minutes delay (right indicator lights) To cancel the Delayed Shut Down feature press the button again. Turning off the fan ^ Hold the joystick to the left until the fan shuts off and the fan power scale indicators go out. Automatic Safety Shut Off The fan will turn off automatically 10 hours after the last movement of the joystick. The lighting remains on. ^ Press the joystick once to the right to turn the fan back on again. Overhead lighting The overhead lighting can be turned on and off independently of the fan. ^To turn the light on or off, press the joystick either once backwards or once forwards. Operation Filter timers Grease filter timer A timer monitors the hours of operation. The indicator for the grease filter will light after 30 hours of fan operation. The grease filters must then be cleaned. After the grease filter has been cleaned and put back in place, the grease filter timer must be reset. Checking the filter timers To check the percentage of time set already used: ^ Press the joystick to the left to turn the fan on. ^ To do this press the grease filter button for about 3 seconds. The indicator will go out. To change the hours of operation, see "Reprogramming the timers". Charcoal filters The timer for the charcoal filter is not preset. Please program this timer, see "Operation / Reprogramming the charcoal filter timer". The charcoal filter indicator will light once the selected time has elapsed. The charcoal filters must then be replaced and the charcoal filter timer must be reset. ^ To do this, press the charcoal filter button for about 3 seconds. The indicator will go out. ^ Press the grease filter or charcoal filter button. The number of flashing indicators show the percentage of programmed hours that have been used. 1 indicator = 25 % 2 indicators = 50 % 3 indicators = 75 % 4 indicators = 100 % This info...