Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
1 Controls & Features...............................................2-3 Maintenance.........................................................4-6 Warranty..................................................................7 Form No. A/05/04 Part No. 8110P263-60 ©2004 Maytag Appliances Sales Co. Litho U.S.A. USE AND CARE GUIDE Read all Instructions before Installing and operating this appliance USE AND CARE GUIDE Read all Instructions before Installing and operating this appliance MODELS: JXT5830 JXT5836 IMPORTANT SAFETY NOTICE WARNING Installation The installation in this manual is intended for qualified installers, service technicians or persons with similar qualified background. DO NOT attempt to install this appliance yourself. Injury could result from installing the unit due to lack of appropriate electrical and technical background. All electrical wiring must be properly installed, insulated and grounded. Overly accumulated grease in old duct work should be cleaned out or duct work should be replaced if necessary to avoid the possibility of a grease fire. Check all joints on duct work to insure proper connection and all joints should be properly taped. Operations Read all instructions in this manual before operating the appliance. Save these instructions for future reference. Always leave safety grills and filters in place. Without these components, operating blowers could catch on to hair, fingers and loose clothing. NEVER dispose cigarette ashes, ignitable substances, or any foreign objects into blowers. NEVER leave cooking unattended. When frying, oil in the pan can easily overheat and catch fire. The risk of self combustion is higher when the oil has been used several times. Cleaning The saturation of greasy residue in the blower and filters may cause increased flammability. Keep unit clean and free of grease and residue build-up at all times to prevent possible fires. Filters must be cleaned periodically and kept free from accumulation of cooking residue (see cleaning instructions inside). Old and worn filters must be replaced immediately. Do not operate blowers when filters are removed. Never disassemble parts to clean without proper instructions. Disassembly is recommended to be performed by qualified personnel only. Call our service cen ter for removal instructions. 1-800-JENNAIR (1-800-536-6247) The manufacturer declines all responsibility in the event of failure to observe the instructions given here for installation, maintenance and suitable use of the product. The manufacturer further declines all responsibility for injury due to negligence and the warranty of the unit automatically expires due to improper maintenance. * Please check for latest specification revisions before any custom work or cutouts. CONTROLS & FEATURES TOUCH CONTROLS & FEATURES 2 The standard Metal Filters are required to be cleaned frequently and as recommended in order to maintain blower efficiency. If improperly maintained, residue from cooking will sift though filters and cause damage to hood blowers and other sensitive components; and possibly clog duct work and create a fire hazard. CONTROLS & FEATURES CONTROLS: FILTER CHANGE INDICATOR (CARBON FILTERS) 3 Filter Change Reminder (Carbon, if fitted): When your hood is installed as a 'Purifying' (Ductless Recirculating) unit, it is fitted with a set of Carbon Filters to purify exhaust and fumes from cooking, then re-circulate the air within the home. These Carbon Filters are required to be replaced after every 120 hours of use. The Filter Change Reminder function in the microprocessor needs to be switched on. The microprocessor in the when carboncontrols when set, will elapse and count usage time and indicate by a flashing filter replacement is needed. Setting the Filter Change Reminder: When Off, hold , (purifying mode/ for approx. 5 seconds. The display will change from (exhaust mode) to carbon filters used) this indicates that the elapse timer function is switched on and Carbon Filters are used. When the display starts flashing, the Carbon Filters require replacement. Filter Replace Indicator: Re-setting Function: Once filters are replaced, with hood off, hold for approximately 5 seconds until , the display will appear; press and hold on display disappears . The Filter Change Reminder is now re-set and a new 120 hours elapse cycle is initiated. hold 5 secs. hold 5 secs. display from <--> to
Fans - JXT5836 (1.04 mb)