The fan speed is set high enoug. for the task. The grease filter is clean. The kitchen is adequately vented t. allow the entry of fresh air. If set up for recirculation, check tha. the charcoal filter is still effective. If set up for extraction, check tha. the ducting and outlets are no. blocked. The cooker hood has switched of. The safety cut-out service has bee. during operation... tripped. Turn off the hob and then wait for th. device to reset. If after all these checks, the problem persists

electrical goods retailer. If the socket outlets are not suitable for the plug fitted t. the appliance, then the plug must be cut off and destroyed for safety reasons, an. an appropriate plug be fitted. When wiring the plug ensure that all strands of wire are securely retained in eac. terminal. Do not forget to tighten the mains lead clamp on the plug. Electrical connection. 230 V - using fixed power supply line with plug. 240 V - using fixed power supply line (Great Britain). Fuse ratin. 13 amp

keep bends in outlet hose to a minimu. . never install the hoses with an acute angle, they mus. always follow a gentle curve onl. . keep the hose as large as possible (120 mm O min.). l Failure to observe these basic rules will drastically reduc. the performance and increase the noise levels of th. extractor hood. Installation - Fig. . . lllll Put the template onto the wall (1) and drill two O12mm holes (2). . lllll Fit two hooks (3) on the drilled holes. . lllll Hang the hood on the hooks and a